Difference between revisions of "Infinity ES-1"

 
Line 1: Line 1:
'''Infinity ES-1 Electrostatic Headphone System'''
+
"Infinity ES-1 Electrostatic Headphone System.
  
Das ES-1 Kopfhörer System beinhaltet eine komplett neue so genannte Niedrig-Massen Membran aus Polyurethin. Diese folgt dynamischen Änderungen viel schneller und präziser als Polyester oder andere Electrostatik Systeme. Das System besteht aus einem Kopfhörer und einem Verstärker im Walnussgehäuse, in dem der Adapter ME-10D, die Stromversorgung und den Anpassungstransformatoren eingebaut sind.
+
This ES-1 / ME-10D was only built in limited numbers (500 pieces).  
  
'''Einige technische Daten:'''
+
The ES-1 headphone system contains a completely new so-called low-mass membrane made of polyurethane. This follows dynamic changes much faster and more precise than polyester or other electrostatic systems. The system consists of a headphone and an amplifier in a walnut housing, in which the adapter ME-10D, the power supply and the matching transformers are built in.
  
* Frequenz Bereich: 20 Hz - 25000 Hz +/- 2 dB
+
'''Some technical data:'''
* Harmonischw Verzerrungen: unter 0.3% bei 100 dB SPL
 
* Empfindlichkeit: 98 dB SPL bei 2 V Eingangsspannung bei 1000 Hz
 
* Maximaler Schalldruck: 118 dB SPL bei 1000 Hz
 
* Quellimedanz: 4 bis 16 ohm
 
* Stromverbrauch 117-220V, 50-60 Hz: 0,01 W
 
* Abmessungen Gehäuse BxHxT: 14 x 8 x 18 cm
 
  
Informationen stammen von www.infinity-classics.de und die Freigabe der Daten ist genehmigt.
+
* Frequency range: 20 Hz - 25000 Hz +/- 2 dB
[[Kategorie:Kopfhörer]]
+
* Harmonic distortion: less than 0.3% at 100 dB SPL
 +
* Sensitivity: 98 dB SPL at 2 V input voltage at 1000 Hz
 +
* Maximum sound pressure: 118 dB SPL at 1000 Hz
 +
* Source impedance: 4 to 16 ohm
 +
* Power consumption 117-220V, 50-60 Hz: 0.01 W
 +
* Housing dimensions WxHxD: 14 x 8 x 18 cm
 +
 
 +
Information is from www.infinity-classics.de and release of data is approved.
 +
[[Category:Headphones]]

Latest revision as of 03:26, 22 July 2011

"Infinity ES-1 Electrostatic Headphone System.

This ES-1 / ME-10D was only built in limited numbers (500 pieces).

The ES-1 headphone system contains a completely new so-called low-mass membrane made of polyurethane. This follows dynamic changes much faster and more precise than polyester or other electrostatic systems. The system consists of a headphone and an amplifier in a walnut housing, in which the adapter ME-10D, the power supply and the matching transformers are built in.

Some technical data:

  • Frequency range: 20 Hz - 25000 Hz +/- 2 dB
  • Harmonic distortion: less than 0.3% at 100 dB SPL
  • Sensitivity: 98 dB SPL at 2 V input voltage at 1000 Hz
  • Maximum sound pressure: 118 dB SPL at 1000 Hz
  • Source impedance: 4 to 16 ohm
  • Power consumption 117-220V, 50-60 Hz: 0.01 W
  • Housing dimensions WxHxD: 14 x 8 x 18 cm

Information is from www.infinity-classics.de and release of data is approved.