Difference between revisions of "Elac ESG 795 E"
m (Passat verschob die Seite Elac ESG-795 E nach Elac ESG 795 E, ohne dabei eine Weiterleitung anzulegen) |
|||
| (6 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | __NOTOC__ | |
| + | == Data == | ||
| + | {{navigation}} | ||
| + | '''General''' | ||
| + | * Manufacturer: [[Elac]] | ||
| + | * Model: ESG-795 E | ||
| + | * Type: Pickup | ||
| + | * Years of manufacture: 1980 - 1984 | ||
| + | * Made in: Japan | ||
| + | * Original price approx.: 386 DM | ||
| − | |||
| − | + | '''Technical data''' | |
| − | + | * Principle: MM | |
| − | + | * Frequency response: 10 - 25,000 Hz | |
| − | + | * Channel separation: > 26 dB at 1 KHz | |
| − | + | * Channel balance: < 1.5 dB | |
| − | + | * Crosstalk attenuation: | |
| − | + | * Output voltage: 5.6 mV at 5.6 cm/s and 1 kHz | |
| + | * Termination resistance: 47 KOhm | ||
| + | * Inductance: 450 mH | ||
| + | * Needle type: Elliptical 6/18µm | ||
| + | * Recommended contact force: 15 mN (needle D 795 E/20) resp. 10 mN (needle D 795 E/30) resp. 7,5 mN (needle D 795 E/40) | ||
| + | * Needle compliance: 20 µm/mN (needle D 795 E/20) resp. 30 µm/mN (needle D 795 E/30) resp. 40 µm/mN (needle D 795 E/40) static | ||
| − | + | == Remarks == | |
| + | * Other models of the same series: | ||
| + | * [[Elac ESG 791]] | ||
| + | * [[Elac ESG 792 E]] | ||
| + | * [[Elac ESG 793 E]] | ||
| + | * [[Elac ESG 794 E]] | ||
| + | * [[Elac ESG 795 E]] | ||
| + | * [[Elac ESG-796 H]] | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | == Pictures == | |
| + | * Image: Elac ESG-795 E | ||
| + | [[File:Elac ESG-795 E-1980.jpg]] | ||
| − | [[ | + | |
| + | == Reports == | ||
| + | |||
| + | [[File:Elac ESG- Daten-1982.jpg]] | ||
| + | |||
| + | |||
| + | == Links == | ||
| + | |||
| + | |||
| + | [[Category:Pickups]] | ||
Latest revision as of 11:00, 4 September 2020
Data[edit]
General
- Manufacturer: Elac
- Model: ESG-795 E
- Type: Pickup
- Years of manufacture: 1980 - 1984
- Made in: Japan
- Original price approx.: 386 DM
Technical data
- Principle: MM
- Frequency response: 10 - 25,000 Hz
- Channel separation: > 26 dB at 1 KHz
- Channel balance: < 1.5 dB
- Crosstalk attenuation:
- Output voltage: 5.6 mV at 5.6 cm/s and 1 kHz
- Termination resistance: 47 KOhm
- Inductance: 450 mH
- Needle type: Elliptical 6/18µm
- Recommended contact force: 15 mN (needle D 795 E/20) resp. 10 mN (needle D 795 E/30) resp. 7,5 mN (needle D 795 E/40)
- Needle compliance: 20 µm/mN (needle D 795 E/20) resp. 30 µm/mN (needle D 795 E/30) resp. 40 µm/mN (needle D 795 E/40) static
Remarks[edit]
- Other models of the same series:
- Elac ESG 791
- Elac ESG 792 E
- Elac ESG 793 E
- Elac ESG 794 E
- Elac ESG 795 E
- Elac ESG-796 H
Pictures[edit]
- Image: Elac ESG-795 E
Reports[edit]
