Difference between revisions of "Elac ESG 794 E"
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Elac]] |
| − | * | + | * Model: ESG-794 E |
| − | * | + | * Type: Pickup |
| − | * | + | * Years of manufacture: 1980 - 1984 |
| − | * | + | * Made in: Japan |
| − | * | + | * Original price approx.: 345 DM |
| − | ''' | + | '''Technical data''' |
| − | * | + | * Principle: MM |
| − | * | + | * Frequency response: 10 - 23,000 Hz |
| − | * | + | * Channel separation: > 24 dB at 1 KHz |
| − | * | + | * Channel balance: < 1.5 dB |
| − | * | + | * Crosstalk attenuation: |
| − | * | + | * Output voltage: 5.6 mV at 5.6 cm/s and 1 kHz |
| − | * | + | * Termination resistance: 47 KOhm |
| − | * | + | * Inductance: 450 mH |
| − | * | + | * Needle type: Elliptical 6/18µm |
| − | * | + | * Recommended contact force: 15 mN (needle D 794 E/20) or 10 mN (needle D 794 E/30) |
| − | * | + | * Needle compliance: 20 µm/mN (needle D 794 E/20) or 30 µm/mN (needle D 794 E/30) static |
| − | == | + | == Remarks == |
| − | * | + | * Other models of the same series: |
* [[Elac ESG 791]] | * [[Elac ESG 791]] | ||
* [[Elac ESG 792 E]] | * [[Elac ESG 792 E]] | ||
| Line 35: | Line 35: | ||
| − | == | + | == Pictures == |
| − | * | + | * Image: Elac ESG-794 E |
| − | [[ | + | [[File:Elac ESG-794 E-1980.jpg]] |
| − | == | + | == Reports == |
| − | [[ | + | [[File:Elac ESG- Daten-1982.jpg]] |
| Line 48: | Line 48: | ||
| − | [[ | + | [[Category:Pickups]] |
Latest revision as of 11:00, 4 September 2020
Data[edit]
General
- Manufacturer: Elac
- Model: ESG-794 E
- Type: Pickup
- Years of manufacture: 1980 - 1984
- Made in: Japan
- Original price approx.: 345 DM
Technical data
- Principle: MM
- Frequency response: 10 - 23,000 Hz
- Channel separation: > 24 dB at 1 KHz
- Channel balance: < 1.5 dB
- Crosstalk attenuation:
- Output voltage: 5.6 mV at 5.6 cm/s and 1 kHz
- Termination resistance: 47 KOhm
- Inductance: 450 mH
- Needle type: Elliptical 6/18µm
- Recommended contact force: 15 mN (needle D 794 E/20) or 10 mN (needle D 794 E/30)
- Needle compliance: 20 µm/mN (needle D 794 E/20) or 30 µm/mN (needle D 794 E/30) static
Remarks[edit]
- Other models of the same series:
- Elac ESG 791
- Elac ESG 792 E
- Elac ESG 793 E
- Elac ESG 794 E
- Elac ESG 795 E
- Elac ESG-796 H
Pictures[edit]
- Image: Elac ESG-794 E
Reports[edit]
