Difference between revisions of "Elac ESG-796 H SP"

m (nur Layout.)
(Daten)
(Tags: mobile edit, mobile web edit)
 
(19 intermediate revisions by 3 users not shown)
Line 1: Line 1:
'''General''': <br />
+
__NOTOC__
 +
== Data ==
 +
{{navigation}}
 +
'''General'''
 +
* Manufacturer: [[Elac]], Kiel, Germany
 +
* Model: ESG 796 H SP + H SP "Anniversary".
 +
* Years of manufacture: 1986 - 1990
 +
* Manufactured in: Germany
 +
* Colour: gold/black
 +
* Weight: 6,5 g
 +
* Original price: UVP 500 DM, anniversary model 300 DM
  
Type:  moving magnet<br />
 
  
Date of manufacturing: ca. 1986
+
'''Technical data'''
<br />
+
* Principle: MM
Price: first 500 DM, later 300 DM.<br />
+
* Frequency response: 10 - 30,000 Hz (+- 1db)
 +
* Channel separation: &gt; 28 dB at 1 kHz
 +
* Channel balance: (1kHz) < 1 dB
 +
* Übersprechdämpfung: >28 db
 +
* Output voltage: 5.6 mV
 +
* Terminating resistor: 47 kOhm
 +
* Induction:
 +
* Needle type: Van den Hul II 5/75 µm (according to Elac writing and cartridge overview, see links, Van den Hul '''I''').
  
'''Technical Data''':
+
This is not correct, because "H SP" means "Special", in other words:  
 +
van den Hul I diamond cut
 +
The systems with only one "H" in the name are equipped with van den Hul II cut, all systems with "H SP" are equipped with van den Hul I cut.
 +
This is also what you can read in the brochures to which the links refer.
  
Output Voltage
+
* Recommended contact force: 10 - 12.5 mN
5,6mV
+
* Needle compliance: 30 µm/mN static
 +
* Recommended eff. tonearm mass: 6-12 g (according to Elac literature 8-14 g, see link)
  
Frequency Response
+
== Pictures==
10Hz - 30kHz
+
* Optics corresponds to [[Elac ESG-796 S]], see also link of the advertising brochure.
  
Tracking Force
+
==Test reports==
1-1.25g
+
*Stereoplay 1986
  
Mass
+
==Link==
6.5g
+
* [http://www.hifimuseum.de/elac-esg796-hsp-h30.html Information about the Elac 796 H Sp at hifimuseum.de]
 
+
* [http://www.aaanalog.de/media/downloads/TA-Daten.pdf Overview pickups, page 5 Elac]
Channel Separation
+
* [http://new-hifi-classic.de/Gallery_MO/albums/M_O/Tonarme/ta-to/Elac/ELAC_D796-H30%2BHSP_(1).jpg Elac advertising label 1986 of the special series] from Forum.
> 28db
+
<br />
 
+
[[Category:Pickups]]</1>
Channel Balance
 
< 1db
 
 
 
Load Impedance
 
47k ohms
 
 
 
Output Impedance
 
 
Stylus
 
diamond pur
 
 
 
Stylus Tip
 
VdH (van d`Hul) I
 
 
 
Cantilever
 
boron
 
 
 
Dynamic Compliance
 
30x10-6cm/Dyne
 
 
 
 
 
'''Link''':
 
* [http://www.hifimuseum.de/elac-esg796-hsp-h30.html Informationen über das Elac 796 HSp bei hifimuseum.de]<br />
 
 
 
 
 
 
 
[[Kategorie:Tonabnehmer]]
 

Latest revision as of 04:45, 15 November 2018

Data[edit]

General

  • Manufacturer: Elac, Kiel, Germany
  • Model: ESG 796 H SP + H SP "Anniversary".
  • Years of manufacture: 1986 - 1990
  • Manufactured in: Germany
  • Colour: gold/black
  • Weight: 6,5 g
  • Original price: UVP 500 DM, anniversary model 300 DM


Technical data

  • Principle: MM
  • Frequency response: 10 - 30,000 Hz (+- 1db)
  • Channel separation: > 28 dB at 1 kHz
  • Channel balance: (1kHz) < 1 dB
  • Übersprechdämpfung: >28 db
  • Output voltage: 5.6 mV
  • Terminating resistor: 47 kOhm
  • Induction:
  • Needle type: Van den Hul II 5/75 µm (according to Elac writing and cartridge overview, see links, Van den Hul I).

This is not correct, because "H SP" means "Special", in other words: van den Hul I diamond cut The systems with only one "H" in the name are equipped with van den Hul II cut, all systems with "H SP" are equipped with van den Hul I cut. This is also what you can read in the brochures to which the links refer.

  • Recommended contact force: 10 - 12.5 mN
  • Needle compliance: 30 µm/mN static
  • Recommended eff. tonearm mass: 6-12 g (according to Elac literature 8-14 g, see link)

Pictures[edit]

  • Optics corresponds to Elac ESG-796 S, see also link of the advertising brochure.

Test reports[edit]

  • Stereoplay 1986

Link[edit]


</1>