Difference between revisions of "Elac EMM-190 T4P"
m |
Analoghatwas (talk | contribs) m (Link Hersteller im hwiki.) |
||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Elac]] |
| − | * | + | * Model: EMM 190 T4P |
| − | * | + | * Type: MM pickup |
| − | * | + | * Years of manufacture: |
| − | * | + | * Made in: Germany |
| − | * | + | * Color: black |
| − | * | + | * Weight: 6,5 g |
| − | * | + | * Original price approx: |
| − | ''' | + | '''Technical data''' |
| − | * | + | * Frequency response: 10 - 25,000 Hz |
| − | * | + | * Channel separation: > 27 dB @ 100 Hz |
| − | * | + | * channel balance: < 1.0 dB |
| − | * | + | * Output voltage: 5.6 mV (1 KHz/5.6 cm/s) |
| − | * | + | * Terminating resistor: > 47 kOhm |
| − | * | + | * Inductance: 450 mH |
| − | * | + | * Needle type: parabolic-elliptic (6 x 50 µm diamond) |
| − | * vert. | + | * vert. scanning angle: 20 |
| − | * | + | * recommended contact force: 1.0 - 1.25 mN |
| − | * | + | * recommended cable inductance: 300 pF |
| − | * | + | * needle compliance: 30 µm/mN |
| − | * | + | * connection: T4P |
| − | + | '''Special features''' | |
| − | ''' | ||
* - | * - | ||
| + | == Remarks == | ||
| + | Other models of the same series: | ||
| − | == | + | == Pictures == |
| − | |||
| − | |||
| − | |||
| − | == | + | == Reports == |
== Links == | == Links == | ||
| − | [[ | + | <br /> |
| + | [[Category:Pickups]] | ||
Latest revision as of 09:29, 3 January 2017
Data[edit]
General
- Manufacturer: Elac
- Model: EMM 190 T4P
- Type: MM pickup
- Years of manufacture:
- Made in: Germany
- Color: black
- Weight: 6,5 g
- Original price approx:
Technical data
- Frequency response: 10 - 25,000 Hz
- Channel separation: > 27 dB @ 100 Hz
- channel balance: < 1.0 dB
- Output voltage: 5.6 mV (1 KHz/5.6 cm/s)
- Terminating resistor: > 47 kOhm
- Inductance: 450 mH
- Needle type: parabolic-elliptic (6 x 50 µm diamond)
- vert. scanning angle: 20
- recommended contact force: 1.0 - 1.25 mN
- recommended cable inductance: 300 pF
- needle compliance: 30 µm/mN
- connection: T4P
Special features
- -
Remarks[edit]
Other models of the same series:
Pictures[edit]
Reports[edit]
Links[edit]