Difference between revisions of "Denon PMA-770"
| Line 1: | Line 1: | ||
| − | Form Integrated Amplifier | + | {{Nicht vorlagenkonform}} |
| − | <Power amplifier part> | + | Baujahr : 1980-1983 |
| − | Circuit system Unreturned [ of 0dB ] power amplifier system | + | Sinusleistung an 8 Ohm,20-20000 Hz= 2x100 Watt Hz= 2x140 Watt bei je 0,02 Klirr |
| − | Output power | + | NP : 1200.- DM |
| − | (both channel drive, a sine wave continuation output, 20Hz - 20kHz) 140W+140W (4ohms) | + | Form Integrated Amplifier |
| − | 100W+100W (8ohms) | + | <Power amplifier part> |
| − | Input sensitivity/impedance 150mV/47kohm | + | Circuit system Unreturned [ of 0dB ] power amplifier system |
| − | THD (20Hz - 20kHz, Output-power-3dB o'clock) 0.005% or less | + | Output power |
| − | Cross modulation distortion | + | (both channel drive, a sine wave continuation output, 20Hz - 20kHz) 140W+140W (4ohms) |
| − | (at the time of a 60Hz:7kHz=4:1 and Output-power equivalent amplitude output) 0.002% or less | + | 100W+100W (8ohms) |
| − | Output bandwidth (IHF, both ch(es) drive, THD 0.035%) 5Hz - 100kHz | + | Input sensitivity/impedance 150mV/47kohm |
| − | Frequency response (at the time of 1W output) 1Hz-250kHz+0 -3 dB | + | THD (20Hz - 20kHz, Output-power-3dB o'clock) 0.005% or less |
| − | Output load impedance (1kHz) 0.08ohm | + | Cross modulation distortion |
| − | Output terminal Speaker AorB: 4ohms - 16ohms | + | (at the time of a 60Hz:7kHz=4:1 and Output-power equivalent amplitude output) 0.002% or less |
| − | Speaker A+B: 8ohm-16ohm | + | Output bandwidth (IHF, both ch(es) drive, THD 0.035%) 5Hz - 100kHz |
| − | Headphone: 390mW/eight ohms | + | Frequency response (at the time of 1W output) 1Hz-250kHz+0 -3 dB |
| − | <Preamplifier part (Input sensitivity/impedance is removed and it is Phono in ->Rec out)> | + | Output load impedance (1kHz) 0.08ohm |
| − | Circuit system The super equalizer system by a direct direct-current servo | + | Output terminal Speaker AorB: 4ohms - 16ohms |
| − | Input sensitivity/impedance Phono MM: 2.5mV/47kohm | + | Speaker A+B: 8ohm-16ohm |
| − | Phono MC: 0.125mV/100 ohms | + | Headphone: 390mW/eight ohms |
| − | Tuner, Aux, Tape:150mV/47kohm | + | <Preamplifier part (Input sensitivity/impedance is removed and it is Phono in ->Rec out)> |
| − | The maximum except take-off/Output power 10V/150mV | + | Circuit system The super equalizer system by a direct direct-current servo |
| − | RIAA deflection (MC/MM) 20Hz-100kHz±0.2dB | + | Input sensitivity/impedance Phono MM: 2.5mV/47kohm |
| − | THD 0.002% or less (at the time of 1kHz and 8V output) | + | Phono MC: 0.125mV/100 ohms |
| − | <Synthesis> | + | Tuner, Aux, Tape:150mV/47kohm |
| − | Signal to noise ratio (IHF-A, input short circuit) Phono MM:90dB | + | The maximum except take-off/Output power 10V/150mV |
| − | Phono MC:73dB | + | RIAA deflection (MC/MM) 20Hz-100kHz±0.2dB |
| − | Tuner, Aux, Tape: 110dB (at the time of a 150mV input) | + | THD 0.002% or less (at the time of 1kHz and 8V output) |
| − | Tone control Bass: ±8dB (100Hz) | + | <Synthesis> |
| − | Treble: ±8dB (10kHz) | + | Signal to noise ratio (IHF-A, input short circuit) Phono MM:90dB |
| − | Subsonic Filter 18Hz, 6 dB/oct | + | Phono MC:73dB |
| − | Loudness characteristic Low-pass: +7dB (100Hz) | + | Tuner, Aux, Tape: 110dB (at the time of a 150mV input) |
| − | High region: +6dB (10kHz) | + | Tone control Bass: ±8dB (100Hz) |
| − | Power source AC100V, 50Hz/60Hz | + | Treble: ±8dB (10kHz) |
| − | Power consumption (Electrical Appliance and Material Control Law) 290W | + | Subsonic Filter 18Hz, 6 dB/oct |
| − | Dimensions Width 434x height 132x depth of 407mm | + | Loudness characteristic Low-pass: +7dB (100Hz) |
| − | Weight 12kg | + | High region: +6dB (10kHz) |
| + | Power source AC100V, 50Hz/60Hz | ||
| + | Power consumption (Electrical Appliance and Material Control Law) 290W | ||
| + | Dimensions Width 434x height 132x depth of 407mm | ||
| + | Weight 12kg | ||
Revision as of 09:39, 16 March 2009
Template:Nicht vorlagenkonform
Baujahr : 1980-1983 Sinusleistung an 8 Ohm,20-20000 Hz= 2x100 Watt Hz= 2x140 Watt bei je 0,02 Klirr NP : 1200.- DM Form Integrated Amplifier <Power amplifier part> Circuit system Unreturned [ of 0dB ] power amplifier system Output power (both channel drive, a sine wave continuation output, 20Hz - 20kHz) 140W+140W (4ohms) 100W+100W (8ohms) Input sensitivity/impedance 150mV/47kohm THD (20Hz - 20kHz, Output-power-3dB o'clock) 0.005% or less Cross modulation distortion (at the time of a 60Hz:7kHz=4:1 and Output-power equivalent amplitude output) 0.002% or less Output bandwidth (IHF, both ch(es) drive, THD 0.035%) 5Hz - 100kHz Frequency response (at the time of 1W output) 1Hz-250kHz+0 -3 dB Output load impedance (1kHz) 0.08ohm Output terminal Speaker AorB: 4ohms - 16ohms Speaker A+B: 8ohm-16ohm Headphone: 390mW/eight ohms <Preamplifier part (Input sensitivity/impedance is removed and it is Phono in ->Rec out)> Circuit system The super equalizer system by a direct direct-current servo Input sensitivity/impedance Phono MM: 2.5mV/47kohm Phono MC: 0.125mV/100 ohms Tuner, Aux, Tape:150mV/47kohm The maximum except take-off/Output power 10V/150mV RIAA deflection (MC/MM) 20Hz-100kHz±0.2dB THD 0.002% or less (at the time of 1kHz and 8V output) <Synthesis> Signal to noise ratio (IHF-A, input short circuit) Phono MM:90dB Phono MC:73dB Tuner, Aux, Tape: 110dB (at the time of a 150mV input) Tone control Bass: ±8dB (100Hz) Treble: ±8dB (10kHz) Subsonic Filter 18Hz, 6 dB/oct Loudness characteristic Low-pass: +7dB (100Hz) High region: +6dB (10kHz) Power source AC100V, 50Hz/60Hz Power consumption (Electrical Appliance and Material Control Law) 290W Dimensions Width 434x height 132x depth of 407mm Weight 12kg