Difference between revisions of "Denon DRA-935 R"
| (11 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
| − | { | + | __NOTOC__ |
| − | + | == Data == | |
| − | + | {{navigation}} | |
| − | + | '''General''' | |
| + | * Manufacturer: [[Denon]] | ||
| + | * Model: DRA-935 R | ||
| + | * Type: Receiver | ||
| + | * Years of manufacture: 1991 - 1993 | ||
| + | * Made in: Japan | ||
| + | * Colors: Black, Champagne | ||
| + | * Remote control: RC-137 (programmable) | ||
| + | * Power consumption: 280 W | ||
| + | * Dimensions: 434 x 160 x 402 mm (WxHxD) | ||
| + | * Weight: 11 kg | ||
| + | * Original price approx.: 1'350 DM | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | '''Connections''' | |
| + | * Number of inputs: 6 | ||
| + | ** Phono MM: 2.5 mV / 47 kOhm | ||
| + | ** CD: 150 mV / 23 kOhm (direct switch: on) or 47 kOhm (direct switch: off) | ||
| + | ** Video: 150 mV / 23 kOhm (direct switch: on) or 47 kOhm (direct switch: off). | ||
| + | Tape 1: 150 mV / 23 kOhm (direct switch: on) resp. 47 kOhm (direct switch: off) | ||
| + | ** Tape2/VCR: 150 mV / 23 kOhm (direct switch: on) or 47 kOhm (direct switch: off) | ||
| + | VDP: 150 mV / 23 kOhm (direct switch: on) resp. 47 kOhm (direct switch: off) | ||
| − | [[ | + | * Number of outputs: |
| + | ** switched AC out (max. 100W). | ||
| + | ** headphones | ||
| + | 2 pairs of speakers (A, B or A+B switchable) | ||
| + | Video out/Monitor: 1 Vpp / 75 Ohm | ||
| + | |||
| + | |||
| + | '''Technical data''' | ||
| + | |||
| + | ''Amplifier'' | ||
| + | * Rated power | ||
| + | ** 8 Ohm: 2 x 100 Watt (20Hz - 20 kHz, 0.015% distortion) | ||
| + | ** 4 Ohm: 2 x 170 Watt (DIN 1 kHz, 0,7% distortion) | ||
| + | * Peak power | ||
| + | ** 8 Ohm: | ||
| + | ** 4 Ohm: 2 x 230 Watt | ||
| + | ** 2 Ohm: 2 x 330 Watt | ||
| + | Distortion factor: 0.006% (- 3 dB at nominal power 8 Ohm) | ||
| + | * Attenuation factor: | ||
| + | * Power bandwidth (IHF): 5 Hz - 40 kHz (8 ohms, 0.05% distortion). | ||
| + | * Frequency response: 20 Hz - 50 kHz +/- 1.5 dB (b. 1 W) | ||
| + | * Output impedance: 0.1 Ohm (b. 1 kHz) | ||
| + | * Signal-to-noise ratio: 86 dB at 5.0 mV input | ||
| + | * Stereo channel separation: | ||
| + | * Tone control: | ||
| + | ** Bass: 100 Hz +/- 10 dB | ||
| + | Treble: 10 kHz +/- 10 dB | ||
| + | * Loudness (variable): low 50 Hz + 10 dB, high 10 kHz + 5 dB (When VARIABLE LOUDNESS is set to "10"). | ||
| + | * High Filter: | ||
| + | * Low Filter (Subsonic): | ||
| + | * Mute: | ||
| + | * Direct/Line-Straight: yes | ||
| + | |||
| + | |||
| + | ''Tuner'' | ||
| + | * Reception: FM, MW | ||
| + | * Frequencies: | ||
| + | ** FM: 87.5 - 108 MHz | ||
| + | MW: 522 - 1611 kHz | ||
| + | * Frequency response: 20 Hz - 15 kHz (+/- 0.5 dB) | ||
| + | * Usable sensitivity: | ||
| + | ** FM: 0.9 µV | ||
| + | MW: 18 µV | ||
| + | * Input sensitivity at 50 dB signal-to-noise ratio (75 Ohm IHF): | ||
| + | ** Mono: 1.5 µV | ||
| + | Stereo: 20 µV | ||
| + | * Distortion factor: Mono: 0.06% / Stereo: 0.09% | ||
| + | * Noise voltage ratio: | ||
| + | ** FM: Mono: 86 dB / Stereo: 82 dB | ||
| + | MW: 55 dB | ||
| + | * Channel separation: 55 dB (1kHz Wide) | ||
| + | * Selectivity: 55 dB (+/- 300kHz) | ||
| + | * Co-wave selection: 1.3 dB | ||
| + | * Spurious wave selection: | ||
| + | * IF attenuation: 80 dB | ||
| + | * IF attenuation: | ||
| + | * AM suppression: 60 dB | ||
| + | * Output level: | ||
| + | * RDS: no | ||
| + | * Station memory: 40 AM/FM stations | ||
| + | |||
| + | |||
| + | '''Special Features''' | ||
| + | * New class A circuit with opto-coupler eliminates switching and crossover distortions | ||
| + | * Power supply with pure current feed reduces dynamic intermodulation distortion by 60 dB | ||
| + | * Loudness circuit with variable characteristics | ||
| + | * Phono MM/MC switchable | ||
| + | * IF bandwidth switching | ||
| + | * Motor-driven remote volume control | ||
| + | * Switched mains socket | ||
| + | * Also suitable for low impedance speakers | ||
| + | |||
| + | |||
| + | == Notes == | ||
| + | * Other models in the same series: | ||
| + | * [[Denon DRA-335 R]] | ||
| + | * [[Denon DRA-435 R]] | ||
| + | * [[Denon DRA-545 RD]] | ||
| + | * [[Denon DRA-735 R]] | ||
| + | * [[Denon DRA-935 R]] | ||
| + | |||
| + | |||
| + | == Pictures == | ||
| + | * Image: Denon DRA-935 R | ||
| + | [[File:Denon DRA-935R.jpg]] | ||
| + | |||
| + | |||
| + | * Picture: Denon DRA-935 R | ||
| + | [[File:014.jpg|1000px]] | ||
| + | |||
| + | |||
| + | * Image: Denon DRA-935 R | ||
| + | [[File:DRA-935R_rear.jpg|1000px]] | ||
| + | |||
| + | |||
| + | * Excerpt from brochure: Denon DRA-545 RD, DRA-735 R, DRA-935 R | ||
| + | [[File:Denon DRA-545-735-935-Prospekt-1993.jpg]] | ||
| + | |||
| + | |||
| + | == Reports == | ||
| + | * The built-in electronics are of the finest. The soundstage is always pleasing and very detailed at any volume. This receiver can take on any of today's red pen castrated receiver! | ||
| + | |||
| + | * High performance phono amplifier; former top of the line model and one of the most powerful receivers Denon has ever built. | ||
| + | |||
| + | * Top-of-the-line speakers, such as the Infinity Kappa 8.2 i Series II, go very well with this receiver. Top-of-the-line headphones are recommended, such as the [[STAX SR-44]] | ||
| + | |||
| + | |||
| + | == Links == | ||
| + | |||
| + | |||
| + | [[Category:Receiver]] | ||
Latest revision as of 02:47, 20 January 2021
Data[edit]
General
- Manufacturer: Denon
- Model: DRA-935 R
- Type: Receiver
- Years of manufacture: 1991 - 1993
- Made in: Japan
- Colors: Black, Champagne
- Remote control: RC-137 (programmable)
- Power consumption: 280 W
- Dimensions: 434 x 160 x 402 mm (WxHxD)
- Weight: 11 kg
- Original price approx.: 1'350 DM
Connections
- Number of inputs: 6
- Phono MM: 2.5 mV / 47 kOhm
- CD: 150 mV / 23 kOhm (direct switch: on) or 47 kOhm (direct switch: off)
- Video: 150 mV / 23 kOhm (direct switch: on) or 47 kOhm (direct switch: off).
Tape 1: 150 mV / 23 kOhm (direct switch: on) resp. 47 kOhm (direct switch: off)
- Tape2/VCR: 150 mV / 23 kOhm (direct switch: on) or 47 kOhm (direct switch: off)
VDP: 150 mV / 23 kOhm (direct switch: on) resp. 47 kOhm (direct switch: off)
- Number of outputs:
- switched AC out (max. 100W).
- headphones
2 pairs of speakers (A, B or A+B switchable) Video out/Monitor: 1 Vpp / 75 Ohm
Technical data
Amplifier
- Rated power
- 8 Ohm: 2 x 100 Watt (20Hz - 20 kHz, 0.015% distortion)
- 4 Ohm: 2 x 170 Watt (DIN 1 kHz, 0,7% distortion)
- Peak power
- 8 Ohm:
- 4 Ohm: 2 x 230 Watt
- 2 Ohm: 2 x 330 Watt
Distortion factor: 0.006% (- 3 dB at nominal power 8 Ohm)
- Attenuation factor:
- Power bandwidth (IHF): 5 Hz - 40 kHz (8 ohms, 0.05% distortion).
- Frequency response: 20 Hz - 50 kHz +/- 1.5 dB (b. 1 W)
- Output impedance: 0.1 Ohm (b. 1 kHz)
- Signal-to-noise ratio: 86 dB at 5.0 mV input
- Stereo channel separation:
- Tone control:
- Bass: 100 Hz +/- 10 dB
Treble: 10 kHz +/- 10 dB
- Loudness (variable): low 50 Hz + 10 dB, high 10 kHz + 5 dB (When VARIABLE LOUDNESS is set to "10").
- High Filter:
- Low Filter (Subsonic):
- Mute:
- Direct/Line-Straight: yes
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 522 - 1611 kHz
- Frequency response: 20 Hz - 15 kHz (+/- 0.5 dB)
- Usable sensitivity:
- FM: 0.9 µV
MW: 18 µV
- Input sensitivity at 50 dB signal-to-noise ratio (75 Ohm IHF):
- Mono: 1.5 µV
Stereo: 20 µV
- Distortion factor: Mono: 0.06% / Stereo: 0.09%
- Noise voltage ratio:
- FM: Mono: 86 dB / Stereo: 82 dB
MW: 55 dB
- Channel separation: 55 dB (1kHz Wide)
- Selectivity: 55 dB (+/- 300kHz)
- Co-wave selection: 1.3 dB
- Spurious wave selection:
- IF attenuation: 80 dB
- IF attenuation:
- AM suppression: 60 dB
- Output level:
- RDS: no
- Station memory: 40 AM/FM stations
Special Features
- New class A circuit with opto-coupler eliminates switching and crossover distortions
- Power supply with pure current feed reduces dynamic intermodulation distortion by 60 dB
- Loudness circuit with variable characteristics
- Phono MM/MC switchable
- IF bandwidth switching
- Motor-driven remote volume control
- Switched mains socket
- Also suitable for low impedance speakers
Notes[edit]
- Other models in the same series:
- Denon DRA-335 R
- Denon DRA-435 R
- Denon DRA-545 RD
- Denon DRA-735 R
- Denon DRA-935 R
Pictures[edit]
- Image: Denon DRA-935 R
- Picture: Denon DRA-935 R
- Image: Denon DRA-935 R
- Excerpt from brochure: Denon DRA-545 RD, DRA-735 R, DRA-935 R
Reports[edit]
- The built-in electronics are of the finest. The soundstage is always pleasing and very detailed at any volume. This receiver can take on any of today's red pen castrated receiver!
- High performance phono amplifier; former top of the line model and one of the most powerful receivers Denon has ever built.
- Top-of-the-line speakers, such as the Infinity Kappa 8.2 i Series II, go very well with this receiver. Top-of-the-line headphones are recommended, such as the STAX SR-44