Difference between revisions of "Audio Technica AT 95 E"
(→Daten) |
Analoghatwas (talk | contribs) (→Bemerkungen: Stückzahl, ref. https://www.lowbeats.de/test-audio-technica-vm95-6-mm-abtaster-bis-200-euro/) |
||
| (14 intermediate revisions by 5 users not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Audio Technica]] |
| − | * | + | * Model: AT 95 E |
| − | * | + | * Years of manufacture: 1981 - 2019 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: green needle carrier |
| − | * | + | * Weight: 5,7 g |
| − | * | + | * Original price approx.: 40,00 € |
| − | ''' | + | '''Technical data''' |
| − | * | + | * Principle: Moving Magnet (MM) |
| − | * | + | * Output voltage: 3.5 mV / 1 kHz |
| − | * | + | * Channel balance: 2.5 dB / 1 kHz |
| − | * | + | * Crosstalk attenuation: 20 dB / 1 kHz |
| − | * | + | * Frequency response: 20 - 20,000 Hz |
| − | * | + | * Channel separation: 18 dB / 1 kHz |
| − | * | + | * Output voltage: 4.0 mV / 1 kHz |
| − | * | + | * Terminating resistor: 47 kOhm |
| − | * | + | * Impedance: 2,800 Ω / 1 kHz |
| − | * | + | * Inductance: 400 mH / 1 kHz |
| + | * Needle type: Elliptical | ||
| + | * Tracking force: 15 - 25 mN (1.5 - 2.5 g). | ||
| + | * Recommended tracking force: 20 mN (2.0 g). | ||
| + | * Needle compliance (static): 20 × 10-6 cm/dyn | ||
| + | * Needle compliance (dynamic): 6.5 × 10-6 cm/dyn / 100 Hz | ||
| + | * Degree of fillet of the diamond: | ||
| + | * Diamond tip mass: | ||
| + | * Vertical scanning angle: 20°. | ||
| + | * Forward resistance: | ||
| + | * Recommended terminating resistor: 47 kΩ. | ||
| + | * Recommended load capacitance per channel: 100-200 pF | ||
| − | + | == Links == | |
| − | * | + | * Audio-Creativ: [https://www.audio-creativ.de/wordpress/wp-content/uploads/Audio-Technica_Tonabnehmer_2015.pdf Audio Technica pickups 2015], retrieved 22 October 2019 |
| − | == | + | |
| − | + | ||
| + | [[Category:Cartridges]] | ||
| + | |||
| + | == Comments == | ||
| + | Other models in the same series: | ||
*[[Audio Technica AT 90|AT 90]] | *[[Audio Technica AT 90|AT 90]] | ||
*[[Audio Technica AT 91|AT 91]] | *[[Audio Technica AT 91|AT 91]] | ||
*[[Audio Technica AT 93|AT 93]] | *[[Audio Technica AT 93|AT 93]] | ||
| − | *[[Audio Technica AT 94 E|AT | + | *[[Audio Technica AT 94 E|AT 94E]] |
| − | + | *Successor: [[Audio Technica VM95|VM95 E]] (as of 2019) | |
| + | Over 5 million units of the AT 95E were produced. | ||
| − | == | + | == Images == |
| + | [[Image:AT95.jpg]] | ||
| + | [[Image:AT95E.jpg]] | ||
| − | == | + | == Reports == |
== Links == | == Links == | ||
| − | [[ | + | [[Category:Pickups]] |
Latest revision as of 12:52, 9 February 2020
Data[edit]
General
- Manufacturer: Audio Technica
- Model: AT 95 E
- Years of manufacture: 1981 - 2019
- Made in: Japan
- Color: green needle carrier
- Weight: 5,7 g
- Original price approx.: 40,00 €
Technical data
- Principle: Moving Magnet (MM)
- Output voltage: 3.5 mV / 1 kHz
- Channel balance: 2.5 dB / 1 kHz
- Crosstalk attenuation: 20 dB / 1 kHz
- Frequency response: 20 - 20,000 Hz
- Channel separation: 18 dB / 1 kHz
- Output voltage: 4.0 mV / 1 kHz
- Terminating resistor: 47 kOhm
- Impedance: 2,800 Ω / 1 kHz
- Inductance: 400 mH / 1 kHz
- Needle type: Elliptical
- Tracking force: 15 - 25 mN (1.5 - 2.5 g).
- Recommended tracking force: 20 mN (2.0 g).
- Needle compliance (static): 20 × 10-6 cm/dyn
- Needle compliance (dynamic): 6.5 × 10-6 cm/dyn / 100 Hz
- Degree of fillet of the diamond:
- Diamond tip mass:
- Vertical scanning angle: 20°.
- Forward resistance:
- Recommended terminating resistor: 47 kΩ.
- Recommended load capacitance per channel: 100-200 pF
Links[edit]
- Audio-Creativ: Audio Technica pickups 2015, retrieved 22 October 2019
Comments[edit]
Other models in the same series:
Over 5 million units of the AT 95E were produced.
Images[edit]
