Difference between revisions of "Audio Technica AT-OC 9 ML/II"
m |
|||
| Line 1: | Line 1: | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Audio Technica]] |
| − | * | + | * Model: AT-OC9ML/II |
| − | * | + | * Years of manufacture: 1996 ff |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: gold |
| − | * | + | * Weight: 8 g |
| − | * | + | * Original price approx.: 500 € |
| − | ''' | + | '''Technical data''' |
| − | * | + | * Frequency response: 15 - 50,000 Hz |
| − | * | + | * Channel separation: > 31 dB @ 1 kHz // 21 dB @ 10 kHz |
| − | * | + | * Channel balance: < 1 dB @ 1 kHz |
| − | * | + | * Output voltage: 0.4 mV @ 1 KHz/5 cm/s |
| − | * | + | * Coil impedance [DC]: 12 ohms @ 1 kHz |
| − | * | + | * Terminating resistor: > 100 Ohm @ 100 -200 pF |
| − | * | + | * Inductance: 50 µH @ 1kHz |
| − | * | + | * needle type: elliptical, bare diamond, micro-line |
| − | * | + | * vertical scanning angle: 23° |
| − | * | + | * Recommended tracking force: 1.25 - 1.75 mN |
| − | * | + | * Needle compliance: 35 x 10^-6 cm/dyne static, 9 x 10^-6 cm/dyne @ 100Hz dynamic |
| − | ''' | + | '''Special Features''' |
| − | * PC/OCC | + | * PC/OCC coils |
| + | |||
| + | == Remarks == | ||
| + | Other models of the same series: | ||
| + | |||
| + | == Pictures == | ||
| + | |||
| + | == Reports == | ||
| + | |||
| + | == Links == | ||
| + | |||
| + | [[Category:Pickups]] | ||
Latest revision as of 15:06, 6 February 2009
Contents
Data[edit]
General
- Manufacturer: Audio Technica
- Model: AT-OC9ML/II
- Years of manufacture: 1996 ff
- Made in: Japan
- Color: gold
- Weight: 8 g
- Original price approx.: 500 €
Technical data
- Frequency response: 15 - 50,000 Hz
- Channel separation: > 31 dB @ 1 kHz // 21 dB @ 10 kHz
- Channel balance: < 1 dB @ 1 kHz
- Output voltage: 0.4 mV @ 1 KHz/5 cm/s
- Coil impedance [DC]: 12 ohms @ 1 kHz
- Terminating resistor: > 100 Ohm @ 100 -200 pF
- Inductance: 50 µH @ 1kHz
- needle type: elliptical, bare diamond, micro-line
- vertical scanning angle: 23°
- Recommended tracking force: 1.25 - 1.75 mN
- Needle compliance: 35 x 10^-6 cm/dyne static, 9 x 10^-6 cm/dyne @ 100Hz dynamic
Special Features
- PC/OCC coils
Remarks[edit]
Other models of the same series: