Akai AA-1010 L
Data[edit]
General
- Manufacturer: Akai
- Model: AA-1010 L
- Years of manufacture: 1977 - 1979
- Made in: Japan
- Color: black, silver
- Remote control: no
- Power consumption: 100 W
- Dimensions: 440 x 125 x 265 mm (WxHxD)
- Weight: 6.4 kg
- Original price approx.: 700 DM
Connections
- Number of inputs:
- 1x Phono: 3 mV / 47 kOhm
1x Tape In, Aux, DIN: 150 mV / 100 kOhm
- Antenna FM (75/300 Ohm) / MW.
- Number of outputs:
- Tape Out: 150 mV / 100 kOhm
DIN: 30 mV / 180 kOhm
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (20-20,000 Hz)
8 Ohm: 2x 14 W 4 Ohm: 2x 16 W
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: < 0.8%
- Attenuation factor:
- Frequency response: 15 - 40,000 Hz
- Signal-to-noise ratio: (noise voltage aa.)
Phono: 80 dB Tape, Aux: 90 dB
- Stereo channel separation:
- Tone control:
- Bass: ±10 dB at 100 Hz
Treble: ±10 dB at 10 kHz
- Loudness: +5/+10 dB (treble/bass)
- High Filter: no
- Low Filter (Subsonic): no
Tuner
- Reception: FM, MW, LW
- Frequencies:
- FM: 88 - 108 MHz
MW: 520 - 1,605 kHz LW: 150 kHz - 350 kHz
- Frequency response:
- Input sensitivity:
- FM: 1.5 µV
- MW: 200 µV / 8 µV (Ext.)
LW: 1 mV Distortion factor:
- FM: 0.3% (mono), 0.6% (stereo)
- Signal-to-noise ratio:
- FM: 65 dB
MW: 45 dB
- Channel separation: 40 dB
- Selectivity:
- FM: > 68 dB
- MW: > 30 dB
LW: > 30 dB
- Co-wave selection:
- Spurious wave selection:
- IF attenuation:
- VHF: > 65 dB
MW: > 55 dB LW: > 35 dB IF attenuation:
- VHF: 70 dB
- MW: 45 dB
- AM suppression: 70 dB
- Station memory: 5 (for FM)
Special Features
- Receiver with long wave
Remarks[edit]
- Other models in the same series:
- Akai AA-1010
- Akai AA-1010 L
- Akai AA-1020
- Akai AA-1020 L
- Akai AA-1030
- Akai AA-1030 L
- Akai AA-1040
- Akai AA-1050
- Akai AA-1150
- Akai AA-1200
Pictures[edit]
- Image: Akai AA-1010 L
Reviews[edit]