Difference between revisions of "Accuphase E-206"

 
(5 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
== Daten ==
+
== Data ==
{{Navigation}}
+
{{navigation}}
'''Allgemein'''
+
'''General'''
* Hersteller: [[Accuphase]]
+
* Manufacturer: [[Accuphase]]
* Modell: E-206
+
* Model: E-206
* Baujahre: um 1990
+
* Type: Integrated amplifier
* Hergestellt in: Japan
+
* Years of manufacture: 1990 - 1993
* Farbe: schwarz, champagner
+
* Made in: Japan
* Typ: analog
+
* Color: Champagne or Black
* Fernbedienung: nein
+
* Remote control:  
* Leistungsaufnahme:  55 / 330 W (Ruhezustand/nach IEC 65)
+
* Power Consumption: 0 / 55 / 330 W (Power Off/ No Output Operation/ IEC 65 Operation).
* Abmessungen: 44,5 x 14,5 x 37,0 cm (BxHxT)
+
* Dimensions: 445 x 145 x 370 mm (WxHxD)
* Gewicht: ca. 17 kg
+
* Weight: approx. 17 kg
* Neupreis ca.: 2.400 DM
+
* New price approx.: 2.400 DM, CHF 2'890.--
  
  
'''Anschlüsse'''
+
'''Connections'''
* Anzahl der Eingänge:
+
* Number of inputs:
** 1x Phono MC / MM über Frontschalter umschaltbar (cinch, "AD" benannt)
+
** Phono 1 MM: 3.9 mV / 47 kOhm, 300 mV max.
*** MC: 0,11 mV / 100 Ohm bei Nennleistung
+
** Phono 2 MC: 110 µV / 100 Ohm, 9.5 mV max.
*** MM: 3,9 mV / 47 kOhm bei Nennleistung
+
** Tuner, Aux: 113 mV / 20 kOhm
** 6x Hochpegel (CD, Tuner, Line1, Line2, Tape1, Tape2) (cinch)
+
** Tape 1, 2: 113 mV / 20 kOhm
*** 113 mV / 20 kOhm bei Nennleistung
+
** Main In: 1.47 V / 20 kOhm
 +
* Number of outputs:
 +
** Tape Rec 1, 2: 89.8 mV / 220 Ohm
 +
** Pre Out: 1.47 V / 200 Ohm
 +
** Headphones (6.3 mm jack, front): 360 mV, 0 - 100 Ohm
 +
** 2 speaker pairs
  
** Eingang Endstufe (cinch, Verbindung Vor/Endstufe über Schiebeschalter an der Rückseite auftrennbar)
 
  
* Anzahl der Ausgänge:
+
* Continuous power (at distortion factor)
** 2x Hochpegel (Tape1, Tape2)
+
** 8 Ohm: 100 W per channel (both channels in operation, 20-20,000 Hz, THD 0.02%)
*** 89,8 mV / 220 Ohm (vom Phonoeingang)
+
** 4 ohms: 140 W per channel (both channels operating, 20-20,000 Hz, THD 0.02%)
 +
* Total harmonic distortion:
 +
** 8 ohms: 0.01% (both channels operating, 0.25 W to rated, 20-20,000 Hz).
 +
** 4 ohms: 0.02% (both channels operating, 0.25 W to rated power, 20-20,000 Hz)
 +
* Attenuation factor:
 +
** 90 (8 ohm load, 50 Hz).
 +
* Frequency Response:
 +
** High level inputs:
 +
*** 20 - 20,000 Hz (+0/-0.2 dB, rated power).
 +
*** 0.5 - 120,000 Hz (+0/-3 dB, 1 W output power)
 +
** Phono inputs:
 +
*** 20 - 20,000 Hz (+0.2/-0.5 dB, rated power).
 +
* Signal-to-noise ratio:
 +
** High level inputs: 106 dB (A), 80 dB (EIA).
 +
** Phono MM: 85 dB (A), 79 dB (EIA)
 +
** High level inputs: 66 dB (A), 74 dB (EIA)
 +
* Tone control: "Presence Equalizer", can be switched off
 +
100 Hz: +/-10 dB
 +
500 Hz: +/-10 dB
 +
2 kHz: +/-10 dB
 +
8 kHz: +/-10 dB
 +
* Loudness: not available
 +
* High Filter: not available
 +
* Low Filter (Subsonic):
 +
** 17 Hz: -12 dB/oct.
 +
* Mute:
 +
** Attenuator: - 20 dB
 +
 
 +
 
 +
'''Special Features'''
 +
* Recording selector switch (all five sources, and "Record Off").
 +
* Tape Copy selector switch (Tape1 > Tape2, OFF, Tape2 > Tape1)
 +
* Phono MM / MC switchable on the front panel
 +
* 4-band equalizer can be switched off
 +
 
 +
 
 +
== Remarks ==
 +
* Other models of the same series:
 +
* [[Accuphase E-206]]
 +
* [[Accuphase E-305]]
 +
* [[Accuphase E-405]]
  
** 1x Kopfhörer (6,3mm Klinke, Front)
 
*** 0,2 V / 4 bis 100 Ohm
 
** 2x Lautsprecherpaare (schaltbar, 4 Fronttaster: Aus, A, B, A+B)
 
*** A oder B: 4 bis 16 Ohm / A und B: 8 bis 16 Ohm
 
  
** Ausgang Vorstufe (cinch, Verbindung Vor/Endstufe über Schiebeschalter an der Rückseite auftrennbar)
+
== Pictures ==
 +
* Image: Accuphase E-206
 +
[[File:Accuphase E-206-Prospekt-1.jpg]]
  
'''Technische Daten'''
 
  
* Dauerleistung (bei Klirrfaktor)
+
* Picture: Accuphase E-206
** 8 Ohm: 100 W pro Kanal (beide Kanäle in Betrieb, 20-20.000 Hz, THD 0,02%)
+
[[Image:Accuphase E-206 Back.JPG]]
** 4 Ohm: 140 W pro Kanal (beide Kanäle in Betrieb, 20-20.000 Hz, THD 0,02%)
+
 
* Gesamtklirrfaktor:
+
 
** 8 Ohm: 0,01% (beide Kanäle in Betrieb, 0,25 W bis Nennleistung, 20-20.000 Hz)
+
* Excerpt from brochure: Accuphase E-206
** 4 Ohm: 0,02% (beide Kanäle in Betrieb, 0,25 W bis Nennleistung, 20-20.000 Hz)
+
[[File:Accuphase E-206-Prospekt-1.jpg]]
* Dämpfungsfaktor:
+
 
** 90 (8 Ohm Last, 50 Hz)
+
 
* Frequenzgang:
+
== Reports ==
** Hochpegeleingänge:
+
* Audio issue 6/2005Individual test: "very good" (top class; 80 points) Price/Performance: "satisfactory". 
*** 20 - 20.000 Hz (+0/-0,2 dB, Nennleistung)
+
 
*** 0,5 - 120.000 Hz (+0/-3 dB, 1 W Ausgangsleistung)
 
** Phonoeingänge:
 
*** 20 - 20.000 Hz (+0,2/-0,5 dB, Nennleistung)
 
* Signalrauschabstand:
 
** Hochpegeleingänge: 106 dB (A), 80 dB (EIA)
 
** Phono MM: 85 dB (A), 79 dB (EIA)
 
** Hochpegeleingänge: 66 dB (A), 74 dB (EIA)
 
* Klangregelung: "Presence Equalizer", abschaltbar
 
** 100 Hz: +/-10 dB
 
** 500 Hz: +/-10 dB
 
** 2 kHz: +/-10 dB
 
** 8 kHz: +/-10 dB
 
* Loudness: nicht vorhanden
 
* High Filter: nicht vorhanden
 
* Low Filter (Subsonic):
 
** 17 Hz: -12 dB/Okt
 
* Mute:
 
** Attenuator -20 dB
 
  
'''Besondere Ausstattungen'''
+
== Links ==
* Recording Wahlschalter (alle fünf Quellen, und "Record Off")
 
* Tape Copy Wahlschalter (Tape1 > Tape2, OFF, Tape2 > Tape1)
 
* Phono MM / MC an der Front abschaltbar
 
* abschaltbarer 4-Band-Equalizer
 
  
  
[[Kategorie:Vollverstärker]]
+
[[Category:Integrated amplifier]]

Latest revision as of 01:30, 4 October 2018

Data[edit]

General

  • Manufacturer: Accuphase
  • Model: E-206
  • Type: Integrated amplifier
  • Years of manufacture: 1990 - 1993
  • Made in: Japan
  • Color: Champagne or Black
  • Remote control:
  • Power Consumption: 0 / 55 / 330 W (Power Off/ No Output Operation/ IEC 65 Operation).
  • Dimensions: 445 x 145 x 370 mm (WxHxD)
  • Weight: approx. 17 kg
  • New price approx.: 2.400 DM, CHF 2'890.--


Connections

  • Number of inputs:
    • Phono 1 MM: 3.9 mV / 47 kOhm, 300 mV max.
    • Phono 2 MC: 110 µV / 100 Ohm, 9.5 mV max.
    • Tuner, Aux: 113 mV / 20 kOhm
    • Tape 1, 2: 113 mV / 20 kOhm
    • Main In: 1.47 V / 20 kOhm
  • Number of outputs:
    • Tape Rec 1, 2: 89.8 mV / 220 Ohm
    • Pre Out: 1.47 V / 200 Ohm
    • Headphones (6.3 mm jack, front): 360 mV, 0 - 100 Ohm
    • 2 speaker pairs


  • Continuous power (at distortion factor)
    • 8 Ohm: 100 W per channel (both channels in operation, 20-20,000 Hz, THD 0.02%)
    • 4 ohms: 140 W per channel (both channels operating, 20-20,000 Hz, THD 0.02%)
  • Total harmonic distortion:
    • 8 ohms: 0.01% (both channels operating, 0.25 W to rated, 20-20,000 Hz).
    • 4 ohms: 0.02% (both channels operating, 0.25 W to rated power, 20-20,000 Hz)
  • Attenuation factor:
    • 90 (8 ohm load, 50 Hz).
  • Frequency Response:
    • High level inputs:
      • 20 - 20,000 Hz (+0/-0.2 dB, rated power).
      • 0.5 - 120,000 Hz (+0/-3 dB, 1 W output power)
    • Phono inputs:
      • 20 - 20,000 Hz (+0.2/-0.5 dB, rated power).
  • Signal-to-noise ratio:
    • High level inputs: 106 dB (A), 80 dB (EIA).
    • Phono MM: 85 dB (A), 79 dB (EIA)
    • High level inputs: 66 dB (A), 74 dB (EIA)
  • Tone control: "Presence Equalizer", can be switched off

100 Hz: +/-10 dB 500 Hz: +/-10 dB 2 kHz: +/-10 dB 8 kHz: +/-10 dB

  • Loudness: not available
  • High Filter: not available
  • Low Filter (Subsonic):
    • 17 Hz: -12 dB/oct.
  • Mute:
    • Attenuator: - 20 dB


Special Features

  • Recording selector switch (all five sources, and "Record Off").
  • Tape Copy selector switch (Tape1 > Tape2, OFF, Tape2 > Tape1)
  • Phono MM / MC switchable on the front panel
  • 4-band equalizer can be switched off


Remarks[edit]


Pictures[edit]

  • Image: Accuphase E-206

Accuphase E-206-Prospekt-1.jpg


  • Picture: Accuphase E-206

Accuphase E-206 Back.JPG


  • Excerpt from brochure: Accuphase E-206

Accuphase E-206-Prospekt-1.jpg


Reports[edit]

  • Audio issue 6/2005Individual test: "very good" (top class; 80 points) Price/Performance: "satisfactory".


Links[edit]