Difference between revisions of "ADC XLM"
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[ADC]] |
| − | * | + | * Model: XLM |
| − | * | + | * Type: Pickup |
| − | * | + | * Years of manufacture: 1972 - 1975 |
| − | * | + | * Made in: USA |
| − | * | + | * Color: system body gold, needle carrier black |
| − | * | + | * Weight: 5,75 g |
| − | * | + | * Original price approx.: 268 DM |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Principle: Induced Magnet (Moving Iron, connection as MM) |
| − | * | + | * Frequency response: 10 - 20,000 Hz (±2 dB) |
| − | * | + | * Channel separation: 25 dB (50 Hz - 20,000 Hz) |
| − | * | + | * Channel balance: |
| − | * | + | * Crosstalk attenuation: |
| − | * | + | * Output voltage: 3.5 mV / 5.5cm / s |
| − | * | + | * Terminating resistor: |
| − | * | + | * Inductance: |
| − | * | + | * Needle type: elliptical (0.008 mm x 0.018 mm). |
| − | * | + | * Recommended contact force: 0.6 - 1.0 p |
| − | * | + | * Needle compliance: 50µm |
| − | == | + | == Remarks == |
| − | * | + | * Other models in the same series: |
* [[ADC 10 E Mk. IV]] | * [[ADC 10 E Mk. IV]] | ||
* [[ADC 25]] | * [[ADC 25]] | ||
| Line 41: | Line 41: | ||
| − | == | + | == Pictures == |
| − | * | + | * Extract from brochure: ADC 10 E Mk IV, VLM, XLM |
| − | [[ | + | [[File:ADC 10 E MK IV-VLM-XLM-Prospekt-1974.jpg]] |
| − | == | + | == Reports == |
| Line 52: | Line 52: | ||
| − | [[ | + | [[Category:Pickups]] |
Latest revision as of 05:20, 3 April 2020
Data[edit]
General
- Manufacturer: ADC
- Model: XLM
- Type: Pickup
- Years of manufacture: 1972 - 1975
- Made in: USA
- Color: system body gold, needle carrier black
- Weight: 5,75 g
- Original price approx.: 268 DM
Technical Data
- Principle: Induced Magnet (Moving Iron, connection as MM)
- Frequency response: 10 - 20,000 Hz (±2 dB)
- Channel separation: 25 dB (50 Hz - 20,000 Hz)
- Channel balance:
- Crosstalk attenuation:
- Output voltage: 3.5 mV / 5.5cm / s
- Terminating resistor:
- Inductance:
- Needle type: elliptical (0.008 mm x 0.018 mm).
- Recommended contact force: 0.6 - 1.0 p
- Needle compliance: 50µm
Remarks[edit]
- Other models in the same series:
- ADC 10 E Mk. IV
- ADC 25
- ADC 26
- ADC 27
- ADC 220 X
- ADC 220 XE
- ADC 550 XE
- ADC 990 XE
- ADC VLM
- ADC XLM
Pictures[edit]
- Extract from brochure: ADC 10 E Mk IV, VLM, XLM
