Difference between revisions of "ADC Super XLM"
m (Änderungen von StevenBrown (Diskussion) rückgängig gemacht und letzte Version von Archibald wiederhergestellt) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[ADC]] |
| − | * | + | * Model: Super XLM |
| − | * | + | * Year of manufacture: 1975 - |
| − | * | + | * Made in: USA |
| − | * | + | * Color: system body gold, needle carrier black |
| − | * | + | * Weight: 5,75 g |
| − | * | + | * Original price approx: |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Principle: Induced Magnet (Moving Iron, connection as MM) |
| − | * | + | * Frequency response: |
| − | ** 10 - 20 | + | ** 10 - 20,000 Hz (±2 dB) |
| − | + | 10 - 50,000 Hz (±5 dB) | |
| − | * | + | * Channel separation: 28 dB |
| − | * | + | * Channel balance: |
| − | * | + | * Crosstalk attenuation: |
| − | * | + | * Output voltage: 0.36 mV / cm / s |
| − | * | + | * Terminating resistor: |
| − | * | + | * Inductance: |
| − | * | + | * Needle type: shibata (0.005 mm x 0.050 mm). |
| − | * | + | * Recommended contact force: 0.75 - 1.5 p |
| − | * | + | * Needle compliance: |
| − | ''' | + | '''Special Features''' |
| − | * | + | * here, if available |
| − | == | + | == Remarks == |
| − | + | Other models of the same series: | |
| − | == | + | == Pictures == |
| − | == | + | == Reports == |
== Links == | == Links == | ||
| − | [[ | + | [[Category:Pickups]] |
Latest revision as of 14:16, 19 November 2012
Data[edit]
General
- Manufacturer: ADC
- Model: Super XLM
- Year of manufacture: 1975 -
- Made in: USA
- Color: system body gold, needle carrier black
- Weight: 5,75 g
- Original price approx:
Technical Data
- Principle: Induced Magnet (Moving Iron, connection as MM)
- Frequency response:
- 10 - 20,000 Hz (±2 dB)
10 - 50,000 Hz (±5 dB)
- Channel separation: 28 dB
- Channel balance:
- Crosstalk attenuation:
- Output voltage: 0.36 mV / cm / s
- Terminating resistor:
- Inductance:
- Needle type: shibata (0.005 mm x 0.050 mm).
- Recommended contact force: 0.75 - 1.5 p
- Needle compliance:
Special Features
- here, if available
Remarks[edit]
Other models of the same series: