Yamaha RX-770
Data
General
- Manufacturer: Yamaha
- Model: RX-770
- Year of manufacture: 1993 - 1995
- Made in: Malaysia
- Colour: Black
- Type: Analog
- Remote control: Yes
- Power consumption: 210 W
- Dimensions: (W x H x D) 435 x 150 x 388.5 mm.
- Weight: 10 kg
- Original price approx.: 1.000,- DM
Connections
- Number of inputs: 5
- CD / Tape 1 / Tape 2 / Phono / LD-TV
- Number of outputs: 4
- Loudspeaker A + B
Technical Data
Amplifier
- Continuous power (at distortion).
8 ohms: 2 × 85 watts at 0.015 %. 6 ohms: 2 × 100 watts at 0.015 %.
- 4 Ohm: 2 × 115 Watt according to DIN
- 2 Ohm: 2 × 135 Watt at 0.015 %
- Dynamic power
- 8 Ohm: 2 × 130 Watt
- 6 Ohm: 2 × 150 Watt
- 4 Ohm: 2 × 180 Watt
- 2 Ohm: 2 × 220 Watt
- Total harmonic distortion: 0.003 %
- Attenuation factor: 240
- Frequency response: 10-50,000 Hz
- Signal-to-noise ratio: 110 dB
- Stereo channel separation: 70 dB
- Tone control:
- Bass: ±10 dB at 20 Hz
Treble: ±10 dB at 20,000 Hz
- Loudness: adjustable
- High filter: no
- Low filter (subsonic): 15 Hz/18 dB, switchable
- Mute: yes, only via remote control
- Direct/Line-Straight: Pure-Direct
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108.0MHz
- MW: 531 - 1.611kHz
- Frequency response:
- FM: 0 ± 1.5dB (20Hz - 15kHz).
- MW:
- Input sensitivity:
- FM: µV / µV (Mono(26dB signal-to-noise ratio)/Stereo(46dB signal-to-noise ratio))
- MW: µV/m
Distortion factor:
- FM: / % (mono/stereo)
- MW: %
Signal-to-noise ratio:
- FM: /dB (mono/stereo)
- MW: dB
- Channel separation: dB
- selectivity:
- FM: dB
- MW: dB
- Co-wave selection:
- Spurious selection:
- IF attenuation:
- FM: dB
- MW: dB
- IF attenuation: dB
- AM suppression:
- Output Level:
- RDS: No
- Station memory:
Special Features
- Separable pre- and power amplifier
- Motor driven controls for source and volume
- Light dots for power, source and volume
- Rec Out selector switch
- Symmetrical circuit board design