Technics RS-AZ 7

Data

General

Connections

Cinch (RCA) stereo

- Sensor for control commands via remote control
Number of outputs: 2
- Cinch (RCA) stereo
- Headphone output, 6.3 mm (adjustable)

Technical data

CrO2: 30 Hz ~ 18 kHz, +/- 3dB ; 20 Hz ~ 19 kHz (DIN)

- Metal: 30 Hz ~ 23 kHz, +/- 3dB ; 20 Hz ~ 24 kHz (DIN)
Distortion factor:
Signal-to-noise ratio: (signal level = full scale; CrO2 band).
- with Dolby C noise reduction: 78 DB;
- with Dolby B noise reduction: 71 DB;
- without noise reduction: 62 DB;
Auto-Reverse: No
Title Search: Yes, TPS
Dolby: Dolby B, C, HX Pro
MPX Filter: Yes, switchable
Fader: No
Pitch control: No
CD Synchro Recording: No

Special Features

Technics Class-AA device
Linear Magnet-Field Class-AA circuit in the recording electronics
Band alignment (Advanced ATC)
Vibration-damping THCB housing base
3-head system with thin film head (Amorphous Z)
Automatic selection of front and rear tape control (monitor circuit)2-motor drive with logic control
Fast rewinding (approx. 35 sec. with C-60 cassettes)
2-motor drive with logic control
Motorized cassette compartment
Direct playback test (PLAY DIRECT)
Remote control (via Technics system remote control)
Switchable MPX filter
Linear electronic tape counter with real-time display
Title search (TPS)
Automatic tape type setting
Level control, separate balance control
Headphone jack with volume control
Timer function (time clock can be switched on)
Precise, tight fit of the cassette by motor control