Sony PS-X 75

Data

General

Technical Data

Special Features

Fully electronic Biotracer tone arm
Feedback system to suppress low-frequency resonances
Electronic control of tracking force and antiskating
Fully automatic operation controlled by sensors
Automatic adjustment of record formats with safety automatic for tonearm
Linear BNL motor (reaches nominal speed after only half a revolution (33 rpm))
Repeat function
Pickup mute function during lift-off and before tonearm touchdown
Separate control of platter and tonearm allows cueing
Short-stroke keys for operation with closed hood
Balancing weight to adapt the arm to heavier cartridges (e.g.: Sony XL-55/Pro)
Cast housing made of low-resonance SBMC
Height-adjustable gel-filled shock-absorbing feet
Adjustment template for the adjustment of the overhang on the back of the platter support

The PS-X75 must probably be considered the successor to the Sony PS-B 80, although both were built at almost the same time. The X75 was revised regarding reliability and price, especially the biotracer arm. This was simplified clearly. Some of the automatic functions (zero balance, anti-skating) were omitted or simplified (detection of the plate format). The electronic display of the contact force also gave way to a conventional scale, and the memory and needle cleaning functions disappeared completely. However, the main functions of the Biotracer remained and there were even practical improvements! During manual control the tonearm moved slowly for 0.5 seconds and then accelerated to normal speed. This made the precise control of certain points on the record much easier. This was not possible with the B80! All in all, these measures led to the desired commercial success, until today. Well preserved devices find, if they are offered, quite fast a new lover.

Other models of the same series:

Courtesy of audioScope. A use of the pictures by third parties, e.g. in forums or on eBay is not permitted!