Sony CDP-CE 335
Brand: Sony
Model: CDP-CE 335
Number of CD:5
Technical data
- Frequency output: 2 Hz to 20 kHz (± 0.5 dB)
- Signal-to-noise ratio: over 102 dB
- Dynamic range: over 98 dB
- Harmonic distortion: less than 0.0045 %
- Outputs:
- LINE OUT: Jack type: RCA jacks; Maximum output level: 2 V (at 50 kOhm); Load impedance: over 10 kOhm.
- DIGITAL OUT (OPTICAL): Jack type: Optical output connector; Maximum output level: -18 dBm; Load impedance: Wavelength: 660 nm
- Playable disc types: CD (audio), CD-R, CD-RW
Operating voltage: 220 V - 230 V AC, 50/60 Hz
- Power consumption: 14 W
- Dimensions (W/H/D): approx. 430 x 120 x 385 mm including protruding parts and controls
- Weight: approx. 5.4 kg
Remarks
- Display of information during playback: During playback of a CD, the display shows the current CD number, the track number, the playing time of the track and the music calendar.
- Swapping CDs while a CD is playing: You can open the CD tray while a CD is playing to see which CD will play next and to swap CDs without interrupting play of the current CD
- Select a specific CD: You can select any CD before or during playback of a CD.
- Searching for a specific track or a specific location in a track: While a CD is playing, you can easily navigate to any track using the AMS (Automatic Music Sensor) control or the number buttons on the remote control. You can also select a specific point in a track.
Repeat play: You can play CDs/tracks repeatedly in any mode. Shuffle Play: This CD player allows you to play the tracks of a CD in random order. The CD player shuffles all tracks on all CDs or on the CD you select. Program Play: You can rearrange the playback order of the tracks on a CD to create your own program. A program can consist of up to 32 "steps", where a step can consist of a single track or an entire CD
Other models in the same series: