Sansui AU-111
Data
General
- Manufacturer: Sansui
- Model: AU-111
- Type: Integrated amplifier with tubes
- Years of manufacture: 1965 - 1969
- Made in: Japan
- Color: Black
- Remote control: -
- Power consumption: 280 W
- Dimensions (WxHxD): 459 x 170 x 344 mm
- Weight: 24.3 kg
- Original price approx.: 2'195 DM
Connections
- Number of inputs:
- Phono MM 1: switchable 0.006 mV, 3.5 ohms / 0.2 mV, 30 - 100 ohms.
- Phono MM 2: 2 mV, 100 kOhm
- Tuner: 220 mV, 100 kOhm
- Aux 1. 2: 220 mV, 100 kOhm
- Tape Play: 200 mV, 100 kOhm
- Number of Outputs:
- Tape Rec:
- Pre Out: 2.1 V
Center Channel: 11.5 V
- Headphones: 6.3 mm jack plug, 8 - 16 Ohm
- 2 speaker pairs
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 2x 40 W (both channels operated)
4 Ohm: 2x 45 W
- Dynamic power
- 8 Ohm: 2x 48 W
- 4 Ohm: 2x 60 W
- Total harmonic distortion: 0.8
- Attenuation factor: 15 at 8 Ohm
- Frequency response: 20 - 20'000 Hz
- Signal-to-noise ratio:
- Phono: > 70 dB
High Level: > 80 dB
- Tone control:
- Bass: ± 15 dB at 20 Hz
- Crossover frequencies: 200 Hz, 400 Hz
- Treble: ± 15 dB at 20'000 Hz
- Crossover frequencies: 2.5 kHz, 5 kHz
- Bass: ± 15 dB at 20 Hz
Low Filter: - 21 dB at 20 Hz High Filter: - 22 dB at 20 kHz Loudness: + 8 dB at 50 Hz, + 5 dB at 10 kHz Muting: 0 dB, - 20 dB
Special Features
- Pre- and power amplifier can be separated
- Tone control L + R separate
Remarks
- Other models in the same series:
- Sansui AU-111:
- Sansui AU-222:
- Sansui AU-555:
- Sansui AU-777:
- Sansui AU-888:
- Sansui AU-999:
Pictures
- Extract from brochure: Sansui AU-111
Reports
- Report from "Good Old Hifi": [[1]]