Sansui 300 L
Data
General
- Manufacturer: Sansui
- Model: 300 L
- Type: Allwave Receiver
- Years of manufacture: 1969 - 1972
- Made in: Japan
- Color: Silver / Black / Brown, housing wood
- Remote control: -
- Power consumption: 100 W
- Dimensions: 450 x 130 x 330 mm
- Weight: approx. 10 kg
- Original price approx.: 1'078 DM
Connections
- Number of inputs:
- Phono MM: 3 mV / 50 kOhm, 150 mV max.
- AUX 1, 2: 180 mV / 100 kOhm
- Tape Play: 180 mV / 100 kOhm
- Tape Play DIN: 180 mV / 100 kOhm
Antenna MW Antenna VHF 300 Ohm Balanced
- Antenna FM 75 Ohm Unbalanced
- Number of outputs:
- Tape Rec 1, 2: 100 mV
Tape Rec DIN: 30 mV
- Headphones (6.3 mm jack, front)
- 1 pair of loudspeakers
Technical Data
Amplifier
- Continuous power
8 Ohm: 2 x 14 W 4 Ohm: 2 x 16 W
- Dynamic power
- 8 Ohm: 2 x 32 W
- 4 Ohm: 2 x 36 W
- Total harmonic distortion: 0.5
- Attenuation factor: 20 at 8 Ohm
- Frequency response: 30 Hz - 25 kHz
- Signal-to-noise ratio:
- Phono MM: 65 dB
High level: 70 dB
- Tone control:
- Bass: ± 10 dB at 50 Hz
Treble: ± 10 dB at 10 kHz
- Loudness: + 11 dB at 50 Hz, + 3 dB at 10 kHz
- High Filter: -10 dB at 10 kHz, 6 dB / octave
- Low Filter (Subsonic):
- Mute:
Tuner
- Reception: FM, MW, LW, KW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 525 - 1,605 kHz LW: 150 - 390 kHz CW: 4 - 12 MHz
- Frequency response: 30 - 15,000 Hz, + 0.5 dB, - 3 dB
- Input sensitivity:
- VHF: 3 µV (IHF)
MW: 51 µV
- Distortion factor:
- FM: 0.5 % (mono), 0.7 % (stereo).
- Signal-to-noise ratio:
- FM: 50 dB (stereo)
- Channel separation:
- FM: 35 dB (at 1 kHz).
- Selectivity:
- FM: 35 dB
- MW: 20 dB
- Equal wave selection:
- FM: 3.0 dB
- Spurious wave selection:
- FM: 90 dB
- Image frequency attenuation:
- FM: 45 dB
- MW: 55 dB
IF attenuation:
- FM: 60 dB
- MW: 45 dB
- AM suppression: 50 dB
Special Features
- VHF muting
- Shortwave magnifier
Remarks
- Other models in the same series:
- Sansui 300 L
- Sansui 600 L
Pictures
- Image: Sansui 300 L
