SABA HiFi Studio I
Data
General
- Manufacturer: SABA
- Model: HiFi Studio I
- Years of manufacture: around 1965 - 1969
- Made in: Germany
- Color:
- Remote control: no
- Power consumption: 100 W
- Dimensions: 650 x 220 x 205 mm (WxHxD)
- Weight: kg
- New price approx:
Connections
- Number of inputs:
- Phono MM: 1.5 mV / 47 kOhm.
- Phono Kirstall: 35 mV / 68 kOhm
- Tape: 100 mV / 47 kOhm
- Number of outputs:
- Tape: 15 mV / 47 kOhm
- 2 pairs of speakers
Technical Data
Amplifier
- Continuous power (at distortion).
- 8 Ohm:
- 4 Ohm:
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 1% (at rated power)
- Attenuation factor: 20 (4 Ohm)
- Frequency response:
- 30 - 20,000 Hz (±1.5 dB).
- 20 - 40,000 Hz (±2 dB)
- Power bandwidth: 20 - 30,000 Hz
- Signal-to-noise ratio: (external voltage, 2x 50 mW)
- Phono, Band: > 50 dB
- Stereo channel separation: > 50 dB (1 kHz).
- Tone control:
- Bass: +12/-20 dB at 40 Hz
- Treble: +12/-15 dB at 20 kHz
- Loudness:
- High Filter: -12 dB at 15 kHz
- Low Filter (Subsonic): -12 dB at 25 Hz
- Mute:
- Direct/Line-Straight: -
Tuner
- Reception: FM, KW, MW, LW
- Frequencies:
- FM: 87 - 104 MHz
KW: 5.93 - 6.25 MHz
- MW: 510 - 1630 kHz
LW: 140 - 350 kHz
- Frequency response: 50 - 16,000 Hz
- Input sensitivity:
- FM: 2/10 µV (mono/stereo, for 26 dB signal-to-noise ratio).
MW: 4 µV Distortion factor:
- FM: 1.5%/2% (mono/stereo).
- Signal-to-noise ratio: (extraneous voltage)
VHF: 64/61 dB (mono/stereo)
- Channel separation: >35 dB (1 kHz)
- Selectivity:
- Co-wave selection:
- Spurious wave selection:
- IF attenuation:
- IF attenuation:
- AM suppression:
- Output level:
- RDS: no
- Station memory: 6 (FM)
Special Features
- -
Remarks
Other models in the same series: