SABA 9260

Data

General

  • Manufacturer: SABA
  • Model: Saba Ultra Hifi professional quartz reference Receiver 9260
  • Type: Receiver
  • Years of manufacture: 1980 - 1982
  • Made in: Germany
  • Color: Anthracite/Silvermetallic or Anthracite/Matt Black
  • Remote control: -
  • Power consumption: min. 60 W, 350 Watt (max)
  • Dimensions: 540 x 135 x 335 mm (WxHxD)
  • Weight: 14.2 kg
  • Original price approx.: 1'500 DM


Connections

  • Number of inputs: 5
    • Monitor, Tape1, Tape2, Magn.Phono, AUX
  • Number of outputs:
    • Tape1/2


Technical Data

Amplifier

  • Continuous power (at distortion)

8 Ohm: 2 x 57 W sinus power

    • 4 Ohm: 2 x 80 W sinus power
  • Dynamic power
    • 8 Ohm: 2 x 78 music power
    • 4 Ohm: 2 x 120 W music power
  • Total harmonic distortion: 0.03% (at rated power, 1kHz)
  • Attenuation factor: (40...12500) 30 for 4Ohm and 60 for 8Ohm
  • Frequency response:
    • 10 - 80,000 Hz (-3 dB, 1%).
    • 15 - 50,000 Hz (±1.5 dB)
  • Signal-to-noise ratio: 81 dB at rated power
  • Stereo channel separation: 60 dB
  • Tone control:
    • Bass: ±15 dB (60 Hz).
    • Treble: ±15 dB (15 kHz)
  • Loudness: +13/6 dB (60 Hz/15 kHz)
  • High Filter: -3dB /8000Hz / 12dB/Oct
  • Low Filter (Subsonic): -3dB / 60 Hz / 12dB/Okt
  • Mute: muting for FM reception
  • Direct/Line-Straight: -


Tuner

  • Reception: VHF/MW
  • Frequencies:
    • FM: 87.5 - 108 MHz
    • MW: 520 - 1630 kHz
  • Frequency response: 50 - 16,000 Hz
  • Input sensitivity:
    • FM, Mono: 0.55 µV for 26dB S/N ratio.
    • Stereo FM: 8 µV for 46 dB noise floor
    • MW: 4 µV
  • Stereo threshold: 5 µV
  • Muting threshold: 3 µV
  • Distortion factor: FM mono and FM stereo: 0.2%
  • Signal-to-noise ratio: FM mono: 68 dB, stereo: 64dB
  • Channel separation: 40 dB
  • selectivity: FM 80 dB, AM: 54 dB
  • Co-wave selection: 1.0 dB at 1 mV
  • Spurious wave selection:
  • IF attenuation:
  • IF attenuation:
  • AM suppression:
  • Output level:
  • RDS: no
  • Station memory: 10


Comments





Pictures

Special Features

  • Presence button: +6dB / 3000Hz
  • Level switch
  • Rotor antenna connection with control by 7 station buttons
  • Tape1/2 copy circuits

Remarks


Hello, I bought the SABA 9260 in 1980. The list price should be 1500 DM, at that time you got a whole HiFi tower with junk equipment at Quelle for 700 DM, I paid 950 DM for the SABA receiver at that time. That was a lot of money for me. The receiver still runs today, unfortunately only the display of the tuner is kapput.

  • Small tip: the tuner display can be repaired with false indications or failure also by the simple exchange of a 800 mA fuse. I bought a 9260 at e... I bought a 9260 that had this.
  • Hello, a little addendum:
  • If the display shows faulty data, simply replacing the fuse is not decisive. The whole display unit must be removed and disassembled. The electronics have two circuit boards. These are connected by several solid metal pins. Remove them by simply pulling them out...clean them...also the inner contacts, reassemble them...and everything runs like new in 99% of all cases!!!!
  • Display error can also be because of the power supply board and the 4066 MOS switching IS error, just cured 2 Saba 9260.


Reports

Links