SABA 9240
Data
General
- Manufacturer: SABA
- Model: Ultra Hifi professional 9240 electronic
- Type: Receiver
- Years of manufacture: 1977 - 1979
- Made in: Germany
- Power consumption: 350 Watt
- Dimensions: 540 x 135 x 330 mm (WxHxD)
- Weight: 13,5 kg
- Original price approx.: 1'248 DM
Connections
- Number of inputs:
- Phono MM: 1.5 mV / 47 kOhm
2x tape, aux, monitor: 270 mV / 470 kOhm
- Antenna FM (75/300 Ohm), MW.
- Number of outputs:
- 2x Band
- 2x headphones
- 3 speaker pairs
Technical Data
Amplifier
- Continuous power (at distortion)
8 Ohm: 2x 57 W 4 Ohm: 2x 70 W (DIN)
- Dynamic power
- 8 Ohm:
- 4 Ohm: 2x 120 W
- Total harmonic distortion: 0.03% (at nominal power)
- Attenuation factor:
- Frequency response:
- 15 - 50,000 Hz (±1.5 dB).
- Power bandwidth: 10 - 80,000 Hz (-3 dB)
- Signal-to-noise ratio:
- Stereo channel separation:
- Tone control:
- Bass: ±15 dB at 60 Hz
- Treble: ±15 dB at 15 kHz
- Presence switch: +6 dB 3 kHz
- Loudness: yes
- High Filter: 8 kHz (12 dB/octave)
- Low Filter (Subsonic): 60 Hz (12 dB/octave)
- Mute: FM Muting
- Direct/Line-Straight: no
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 104 MHz
- MW: 520 - 1,630 kHz
- Frequency response:
- Input sensitivity:
- FM mono: 0.55 µV for 26 dB signal-to-noise ratio
FM stereo: 8 µV for 46 dB signal-to-noise ratio
- MW: 4
Distortion factor:
- FM: 0.2% / 0.25% (mono/stereo).
- Signal-to-noise ratio: (extraneous voltage)
- FM: 64 / 62 dB (mono/stereo)
- Channel separation:
- FM: 40 dB (1 kHz)
- Selectivity:
- FM: 80 dB
MW: 54 dB
- Co-wave selection: 1.0 dB (1 mV, 300 Ohm)
- Spurious wave selection:
- Image frequency attenuation:
- FM: 95 dB
MW: 52 dB
- IF attenuation:
- AM rejection: 55 dB (1 mV, 300 ohms).
- Station memory: no (model "9240 S": six)
Remarks
- Other models in the same series:
- SABA 9060
- SABA 9140
- SABA 9240
- SABA 9240 S
- SABA 9241
Pictures
- Image: SABA Ultra Hifi professional 9240 Electronic
- Extract from brochure: SABA Ultra Hifi professional 9240 Electronic
