Rotel RX-303
Data
General
- Manufacturer: Rotel
- Model: RX-303
- Years of manufacture: 1976 - 1981
- Made in: Japan
- Color: silver, wooden cabinet
- Remote control: no
- Power consumption:
- Dimensions (WxHxD): 470 x 135 x 285 mm.
- Weight: 6.5 kg
- New price approx.: 240 US-$, corresponds to about 700 DM
Connections
- Number of inputs:
- Phono MM: 2.5 mV / 50 kOhm
AUX: 150 mV / 80 kOhm Tape Play: 150 mV / 50 kOhm
- Antenna FM (75/300 Ohm), MW (300 Ohm).
- Number of outputs:
- Tape Rec: 150 mV / 100 Ohm (Cinch); 30 mV / 80 kOhm (DIN).
- Headphones (6.3 mm jack, front)
- 2 pairs of speakers
Technical Data
Amplifier
- Continuous power
- 8 Ohm:
- 4 Ohm: 2x 30 W
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.2 % (at nominal power)
- Attenuation factor: 40 (8 Ohm)
- Frequency response: 10 - 35'000 Hz
- Signal-to-noise ratio:
- Phono MM: 70 dB
- AUX, Tape: 80 dB
- Stereo channel separation:
- Tone control:
- Bass: ± 10 dB at 100 Hz
Treble: ± 10 dB at 10 kHz
- Loudness: +8 / +5 dB (100 Hz/10 kHz)
- High Filter: no
- Low Filter (Subsonic): no
- Mute: no
- Direct/Line-Straight: no
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 525 - 1605 kHz
- Frequency response: 30 - 15'000 Hz (+0/-1.5 dB, FM)
- Input sensitivity:
- FM: 1.8 µV (IHF)
MW: 20 µV Distortion factor:
- FM: 0.15% (mono), 0.3% (stereo).
- Signal-to-noise ratio:
- FM: 68 dB (mono), 60 dB (stereo)
MW: 50 dB
- Channel separation:
- FM: 40 dB (at 1 kHz)
- Separation: (IHF)
FM: 50 dB
- MW: 35 dB
- Equal wave selection:
- FM: 2.0 dB
- Spurious wave selection:
- FM: 85 dB
- Image frequency attenuation:
- FM: 85 dB
- MW: 45 dB
IF attenuation:
- FM: 100 dB
- AM suppression: 65 dB
Special Features
- Wooden housing
- FM muting
Remarks
- Other models in the same series:
Pictures
- Extract from brochure: Rotel RX-303
Datei:Rotel RX-303-Prospekt-1.jpg
