Onkyo TX-SR 602 E
Brand: Onkyo
Model: TX-SR 602 E
Technical data
- Output power per channel at 6 ohms, 1 kHz, DIN: 120 W
- Frequency response: 10 Hz - 100 kHz
- Vector Linear Shaping Circuitry (VLSC) for FL/FR
Wide Range Amplifier Technology (WRAT)
- Reduced NFB (Negative Feedback)
- H.C.P.S. - Massive, enormously powerful transformer
- Optimum Gain Volume Circuit
- Fully discrete power amp design for all channels
- High current, low impedance 6 ohm operation for all channels
- Suitable for 4-ohm speakers
- Automatic protection circuit
- Low Frequency Effect (LFE) level control
- Absolute Ground Plate (absolute equipotential bonding through equal ground points of all signal units)
- Audio/Video features:
- DTS
DTS 96/24
- DTS-ES Discrete
- Matrix 6.1
- DTS NEO:6
- Dolby Digital EX
- Dolby Pro Logic IIx
- Linear PCM 192 kHz, 24-bit D/A Converter
- Component video up-conversion with TBC (Time Base Corrector)
- Automated speaker setup with microphone
- Digital upsampling
- HDTV-capable (50 MHz) switchable component connections (3 inputs/1 output)
- 32-Bit DSP Chip
- 32 DSP modes
- Non-Scaling Configuration
- Y/C Mix Circuit for Monitor Output
- A-Form Listening Mode Memory
- CinemaFILTER
- Adjustable Subwoofer Crossover Frequency (60/80/100/120/150 Hz)
- Double Bass Function
- Zone 2 capability, including switchable power amplifiers.
- Connections:
- 5 S-Video inputs
3 S-video outputs
- 3 Component Video Inputs
- 1 component video output
- 2 audio inputs
- Headphone Out
- 5 A/V inputs
- Zone 2 line output
- 1 digital output (optical)
- 4 digital inputs freely assignable
- Color-coded 5.1 multichannel
DVD-Audio & Super Audio CD Inputs Heavy-duty, color-coded speaker cable connection terminal (banana plug compatible)
- Preamp output for subwoofer
- Video signal conversion from composite to S-Video
- Pure Audio Mode
- Direct mode
- Automatic signal detection
- Late Night mode (high, low, off)
- Rec Out selector (audio) for cassette deck recording
- Bass and treble control (L/R)
- FM/AM Tuner Features:
- 40 FM/AM presets
- Character Input (Tuner Station Buttons, Input Selector)
FM Auto Scan Tuning FM Stereo Indicator 75 Ohm Antenna Input
- IntelliVolume individual volume adjustment for each signal source
- IR Input
- 12 V trigger for 2nd listening zone
- Indicator for absolute volume
- On-Screen Display
- Separate sections for audio and video signal processing
- DOT matrix display with 35 display segments
- 3-level display dimmer (light, normal, dark)
- Individual input switches for each source
Notes
Other models in the same series: