Onkyo TX-6000
Data
Onkyo Stereo Receiver TX-6000
General:
- Manufacturer: Onkyo
- Model: TX-6000
- Years of manufacture: 1980
- Manufactured in:
- Color:
- Remote control:
- Power input: 120 V, 60 Hz (USA, Canada).
- Dimensions: 540 x 142 x 392 mm (WxHxD)
- Weight: 15 Kg
- New price approx:
Connections:
- Number of inputs:
- Phono
- Phono ground connection
- Tape
- Coaxial FM- antenna connection (75 Ohm)
- AM- antenna connection
- Number of outputs:
- 2 pairs of speakers (switchable)
- Headphone output (6.3 mm jack)
Technical data:
Amplifier:
- Continuous power (with distortion factor)
8 Ohm: 2 x 70 Watt , 20-20 khz (0,03 %) RMS
- 4 Ohm:
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.03 % (0.028 % at 1 Watt)
- Attenuation factor: 50 (8 ohm)
- Frequency response: 15 - 30,000 Hz ± 1 dB
- Signal-to-noise ratio:
- Phono MM: 76 dB
Tape: 80 dB
- Phono Overload: 200 mV RMS (1 khz)
- Stereo Channel Separation:
- Tone control:
- Bass: ± 12 dB (100 Hz)
Treble: ± 10 dB (10 khz)
- Loudness: + 8 dB at 40 Hz, + 5 dB at 20 khz)
- High Filter: yes
- Low Filter (Subsonic): yes
- Mute:
- Direct/Line-Straight:
Tuner:
- Reception: FM, AM
- Frequencies:
- FM: 87.9 - 107.9 MHz
- MW: 530 - 1,620 kHz
- Frequency response:
- FM: 30 - 15,000 Hz (± 1.5 dB).
- Input sensitivity:
- Distortion factor:
- FM mono: 0.12 %
FM stereo: 0.25 Signal-to-noise ratio:
- FM stereo: 68 dB
- AM: 40 dB
- Channel separation: 40 dB (1 khz)
- Selectivity:
- Co-wave selection:
- Spurious wave selection:
- IF attenuation:
- IF attenuation:
- AM suppression:
- Output level:
- RDS:
- Station memory:
Pictures
Remarks
Other models in the same series: