Nikko NR-519
Data
General
- Manufacturer: Nikko
- Model: NR-519
- Type: Receiver
- Years of manufacture: 1979 - 1981
- Made in: Japan
- Color: front silver, wooden cabinet
- Remote control: no
- Power consumption: 190 W
- Dimensions: 452 x 142 x 280 mm (WxHxD)
- Weight: 7.2 kg
- Original price approx.: 240 US-$, 780 DM
Connections
- Number of inputs:
- Phono: 2.5 mV, 47 kOhm, 200 mV max.
Aux: 150 mV, 47 kOhm, max. 500 mV Tape Play: 150 mV, 47 kOhm, max. 500 mV Tape Play DIN: 150 mV, 47 kOhm, max. 500 mV
- Antenna FM / MW: 75, 300 Ohm / 300 Ohm
- Number of outputs:
- Tape Rec: 150 mV, 2.2 kOhm.
- Tape Rec DIN: 30 mV, 80 kOhm
- Headphones (6.3mm jack)
- 2 pairs of speakers
Technical Data
Amplifier
- Continuous power (at distortion):
- 8 Ohm: 2x 20 W (RMS, 20 - 20'000 Hz, 0.08 %).
- 4 Ohm:
- Dynamic power:
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: < 0.08 %
- Attenuation Factor:
- Frequency Response:
- Phono: 30 - 15'000 Hz, ± 1 dB
High level: 20 - 20'000 Hz, ± 1 dB
- Signal-to-noise ratio:
- Phono: 75 dB
- High level: 95 dB
- Tone control:
- Bass at 70 Hz: ± 10 dB
Treble at 10 kHz: ± 10 dB
- Loudness: yes, + 10 dB at 70 Hz, + 6 dB at 10 kHz
- Low Filter: yes, - 3 dB at 20 Hz
- High Filter:
- Mute:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 88 - 109 MHz
- MW: 530 - 1600 KHz
- Input sensitivity:
- FM: 2.2 µV
- MW: 350 µV
- Frequency response: 30 - 15'000 Hz
- Distortion factor FM (1 kHz):
- Mono: < 0.8
- Stereo: < 0.18 %
- Signal-to-noise ratio:
- FM mono: 65 dB
FM stereo: 60 dB
- MW: 38 dB
- Channel separation: 40 dB (1 kHz)
- selectivity:
- FM: 75 dB
- MW: 30 dB
- Co-wave selection: 1.8 dB
- Spurious wave selection: 55 dB
- Image frequency attenuation:
- FM: 55 dB
- MW: 30 dB
IF attenuation:
- FM: 70 dB
- MW: 25 dB
- AM suppression: 50 dB
Remarks
- Other models in the same series:
- Integrated amplifier:
- Nikko NA-390 II
- Nikko NA-590 II
- Nikko NA-790
- Nikko NA-1090
- Nikko NA-2090
- Equalizer:
- Nikko EQ-I
- Nikko EQ-II
- Reverberator:
- Nikko ATD-I
Pictures
- Image: Nikko NR-519
