Kenwood KT-3050 LTG
Data
General
- Manufacturer: Kenwood
- Model: KT-3050 LTG (L = long wave)
- Model series: Titan series
- Type: Tuner
- Years of manufacture: 1993 - 1994
- Colour: Titanium
- Remote control: no (only remote controllable via remote cable with a Kenwood amplifier)
- Power consumption: 12 W
- Dimensions: 440 x 98 x 283 (WxHxD)
- Weight: 3,1 kg
- Original price approx.: 449 DM
Connections
- Number of outputs:
- Cinch (800mV/600 Ohm)
- Number of inputs:
- FM antenna (coaxial, 75 Ohm), terminal connection.
Technical data
- Reception: FM, MW, LW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 531 - 1602 KHz LW: 153 - 279 KHz
- Frequency Response:
- Input sensitivity:
- FM: 28µV
- MW: 15µV
LW: 20µV Distortion factor: 0.2-0.5% (FM, LW)
- Signal to noise ratio: 66dB
- Channel separation: 50dB (1KHz)
- selectivity: 55-65dB
- Co-wave selection:
- Spurious wave selection:
- IF attenuation: 85dB (98MHz, VHF).
- IF attenuation:
- AM suppression:
- Output level: 800mV/600 ohms (fixed).
- RDS: Yes
- Station memory: 30, 9 by direct selection via front panel buttons
Special Features
- Metal front panel
- Device cannot be switched off completely, stand-by mode when pressing the on/off switch
Remarks
- Other models in the same series:
- Integrated amplifier:
- Kenwood KA-4050 RTG
- Tuner:
- Kenwood KT-3050 LTG
- CD player:
- Kenwood DP-5050 TG
- Tape deck:
- Kenwood KX-5050 TG
Pictures
- Extract from brochure: Kenwood DP-5050 TG, KA-4050 RTG, KT-3050 LTG, KX-5050 TG
