Kenwood KR-2400
Data
General
- Manufacturer: Kenwood
- Model: KR-2400
- Years of manufacture: 1974 - 1976
- Made in: Japan
- Color: silver
- Remote control: no
- Power consumption: 75 W
- Dimensions: 480 x 137 x 345 mm (WxHxD)
- Weight: 8.2 kg
- Original price approx.: 875 DM
Connections
- Number of inputs:
- 1x Phono MM (Cinch): 2.5 mV / 50 kOhm.
1x Tape In (Cinch/DIN): 150 mV / 45 kOhm
- AUX (Cinch): 150 mV / 45 kOhm
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- 1x Tape Out (Cinch/DIN): 150 mV / 100 Ohm (Cinch); 30 mV / 80 kOhm (DIN).
FM Quadradial
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Specifications
Amplifier
- Continuous power
8 Ohm: 2x 16 W (1 kHz) 4 Ohm: 2x 20 W (1 kHz)
- Dynamic power
- 8 Ohm:
- 4 Ohm: 62 W
- Total harmonic distortion: 1% (at nominal power)
- Attenuation factor: 30 (8 Ohm)
- Frequency response:
- Preamplifier: 10 - 40,000 Hz (±1 dB).
- Power bandwidth: 10 - 30,000 Hz
- Signal-to-noise ratio:
- Phono MM: 70 dB
- AUX, Tape: 87 dB
- Stereo channel separation:
- Tone control:
- Bass: ±8 dB at 100 Hz
Treble: ±8 dB at 10 kHz
- Loudness: +10/+5 dB (100 Hz/10 kHz)
- High Filter: -9 dB at 10 kHz
- Low Filter (Subsonic): no
- Mute: FM muting
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
- MW: 525 - 1,605 kHz
- Frequency response:
- Input sensitivity:
- FM: 2.5 µV (IHF)
MW: 25 µV Distortion factor:
- FM: 0.4% (mono), 0.6% (stereo).
- Signal-to-noise ratio:
- FM: 62 dB (stereo)
MW: 45 dB
- Channel separation:
- FM: 33 dB (at 1 kHz).
- Selectivity:
- FM: 45 dB
- MW: 25 dB
- Equal wave selection:
- FM: 3 dB
- Spurious wave selection:
- FM: 75 dB
- Mirror frequency attenuation:
- FM: 50 dB
- MW: 45 dB
IF attenuation:
- FM: 80 dB
- MW: 33 dB
- AM suppression: 45 dB
Special Features
Remarks
- Other models in the same series:
Pictures
- Extract from brochure: Kenwood KR-2400
