Kenwood KR-2200
Data
General
- Manufacturer: Kenwood
- Device type: Receiver
- Model: KR-2200
- Years of manufacture: 1972 - 1974
- Manufactured in: Japan
- Color: Silver / Black, walnut wooden cabinet
- Power consumption: 56 W
- Dimensions: 446 x 120 x 384 mm
- Weight: 6.1 kg
- Original price approx.: 800 DM
Connections
- Number of inputs:
- Phono MM: 3 mV, 50 kOhm.
- Microphone: Level control / 6.3 mm jack plug on front panel
- AUX: 120 mV, 30 kOhm
- Tape Play:
- Cinch: 120 mV, 30 kOhm
- DIN: 30 mV, 80 kOhm
- Antenna FM (75 Ohm Unbalanced / 300 Ohm Balanced), AM
- Number of Outputs:
- Tape Rec:
- Cinch: 150 mV, 100 Ohm
- DIN: 30 mV, 80 kOhm
- Headphones: 6.3 mm jack plug
- 2 pairs of speakers
- Tape Rec:
Technical Data Tuner Part
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 525 - 1605 kHz
- Frequency response: 20 - 15,000 Hz
- Input sensitivity:
- FM: 2.5 µV (IHF)
MW: 25 µV Distortion factor:
- FM: 0.5 % (mono), 0.9 % (stereo).
- MW:
- Signal-to-noise ratio:
- FM: 69 dB
MW: 45 dB
- Channel separation:
- FM: 40 dB (at 1 kHz)
- Selectivity: (IHF)
- FM: 40 dB
- MW: 25 dB
- Equal wave selection:
- FM:
- Spurious wave selection:
- FM:
- IF attenuation:
- FM:
- AM:
- IF attenuation:
- FM:
- AM Suppression:
Technical Data Amplifier Part
- Continuous power:
- 8 Ohm: 2 x 8 W
4 Ohm: 2 x 9 W
- Dynamic power
- 8 Ohm: 20 W
4 Ohm: 22 W
- Total harmonic distortion: 1.0% (at nominal power)
- Attenuation factor: 45 (8 Ohm)
- Frequency response: 25 - 35,000 Hz
- Signal-to-noise ratio:
- Phono: 60 dB
- Microphone: 60 dB
- AUX, Tape: 70 dB
- Tone control:
- Bass: ± 8 dB at 100 Hz
Treble: ± 8 dB at 10 kHz
- Loudness: + 8 / + 5 dB (100 Hz / 10 kHz)
Special Features
- Microphone: Level control / 6.3 mm jack plug on front panel
Remarks
- Other models in the same series:
- Kenwood KR-2200
- Kenwood KR-3200
- Kenwood KR-4200
- Kenwood KR-5200
- Kenwood KR-6200
- Kenwood KR-7200
Pictures
- Image: Kenwood KR-2200 Front
- Picture: Kenwood KR-2200 rear
