Kenwood KR-2090
Data
General
- Manufacturer: Kenwood
- Model: KR-2090
Type: Receiver
- Years of manufacture: 1978 - 1980
- Made in: Japan
- Color: Silver
- Remote control: no
- Power consumption: 150 W
- Dimensions: 468 x 140 x 368 mm (WxHxD)
- Weight: 7.2 kg
- Original price approx.: 598 DM
Connections
- Number of inputs:
- Phono MM (Cinch): 2.5 mV / 50 kOhm.
1x Tape In (Cinch/DIN): 150 mV / 45 kOhm
- Aux (Cinch): 150 mV / 45 kOhm
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- 1x Tape Out (Cinch/DIN):
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power
- 8 Ohm: 2x 16 W (20-20,000 Hz)
- 4 Ohm:
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.05% (at rated power)
- Attenuation Factor:
- Frequency Response:
- Power bandwidth: 10 - 60,000 Hz
- Signal-to-noise ratio: (IHF-A)
- Phono MM: 76 dB
- AUX, Tape: 100 dB
- Stereo Channel Separation:
- Tone control:
- Bass: ±8 dB at 100 Hz
Treble: ±8 dB at 10 kHz
- Loudness: +10 dB (100 Hz)
- High Filter: no
- Low Filter (Subsonic): no
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 525 - 1605 kHz
- Frequency response: 20 - 15,000 Hz
- Input sensitivity:
- FM: 1.3 µV (IHF)
MW: 20 µV
- Distortion factor: (1 kHz)
- FM: 0.15% (mono), 0.3% (stereo)
- Signal-to-noise ratio: (IHF-A)
FM: 76 dB (mono), 72 dB (stereo) MW: 50 dB
- Channel separation:
- FM: 40 dB (at 1 kHz).
- Selectivity:
- FM: 54 dB
- Equal wave selection:
- FM: 1.5 dB
- Spurious wave selection:
- FM: 75 dB
- Image frequency attenuation:
- FM: 60 dB
- MW: 50 dB
IF attenuation:
- FM: 90 dB
- AM suppression: 55 dB
Comments
- Other models in the same series:
- Kenwood KR-2090
- Kenwood KR-3090
- Kenwood KR-4070
- Kenwood KR-5030
- Kenwood KR-6030
- Kenwood KR-8010
Pictures
- Extract from brochure: Kenwood KR-2090