Kenwood KA-8100

Data

General

  • Manufacturer: Kenwood
  • Model: KA-8100
  • Type: Integrated amplifier
  • Years of manufacture: 1977 - 1979
  • Made in: Japan
  • Color: Silver
  • Remote control: no
  • Power consumption: 600 W max.
  • Dimensions: 430 x 149 x 384 mm (WxHxD)
  • Weight: 16 kg
  • Original price approx.: 1298 DM


Connections

  • Number of inputs: 6

Phono 1 2,5mV/50kOhm/ 85dB 250mV (rms) max.

    • Phono 2 2,5mV/50kOhm/ 85dB

Tuner 150mV/50kOhm/110dB Aux 150mV/50kOhm/110dB Tape A/B 150mV/50kOhm/110dB

  • Number of outputs: 3
    • Tape rec. 150mV/220Ohm
    • Headphones (6.3mm jack)
    • 2 pairs of loudspeakers
    • Pre-Out 1,0V/470Ohm
    • Phono RIAA standard +/- 0,2dB
    • Aux/Tape 7 - 50000 Hz +0dB / -1dB


Technical Data

  • Continuous power (at distortion)
    • 8 Ohm: 75W + 75W

4 Ohm: 90W + 90W

  • Dynamic power
    • 4 Ohm: 330W
  • Total harmonic distortion:
    • 0.03% at nominal power into 8 Ohm
    • 0.01% at 1W into 4 Ohm
  • Attenuation factor: 50 at 8 Ohm
  • Frequency response: 5 - 50000 Hz
  • Signal to noise ratio: 115dB
  • Stereo channel separation: ?
  • Tone control(switchable):
    • Bass: yes (150 or 400 Hz switchable) +/- 7.5dB.

treble: yes (3 or 6 kHz switchable) +/- 7,5dB Loudness: yes (6 levels) 50Hz: +3dB/+6dB/+9dB

    • 100Hz: +3dB/+6dB/+9dB
  • High Filter: yes - 8kHz/12dB/oct.
  • Low Filter: yes - 40Hz/12dB/oct.
  • Subsonic Filter: yes - 18Hz/6dB/oct.
  • Mute: no, but a gain control switch -10dB/ 0 / +10dB
  • Direct/Line-Straight: yes - at the turnover switches of the tone controls


Special Features

  • Pre- and power amplifier can be separated via jumper plugs on the rear panel
  • Double power supply, separate for both channels
  • Current limiting circuit to protect the power amplifier and the speakers in case of overload and short circuit
  • DC-coupled power amplifier


Notes


Pictures

  • Image: Kenwood KA-8100

Ka8100.jpg


  • Excerpt from brochure: Kenwood KA-8100

Kenwood KA-8100-Prospekt-1978.jpg



Reports

Links