Akai AA-1135
Data
General
- Manufacturer: Akai
- Model: AA-1135
- Year built: circa 1979
- Made in: Japan
- Color: black, silver
- Remote control: no
- Power consumption: 150 W
- Dimensions: 480 x 155 x 345 mm (WxHxD)
- Weight: 10,8 kg
- Original price approx:
Connections
- Number of inputs:
- 1x Phono: 3 mV / 47 kOhm.
2x Tape In, Aux, DIN: 150 mV / 100 kOhm
- Antenna FM (75/300 Ohm) / MW.
- Number of outputs:
- Tape Out: 150 mV / 3 kOhm
DIN: 30 mV / 30 kOhm
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (20-20,000 Hz, IHF).
8 Ohm: 2x 38 W 4 Ohm: 2x 40 W
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: < 0.2%
- Attenuation factor:
- Frequency Response: 6 - 50,000 Hz (-3 dB).
- Signal-to-noise ratio: (noise voltage aa.)
Phono: 80 dB Tape, Aux: 90 dB
- Stereo channel separation:
- Tone control:
- Bass: ±9 dB at 100 Hz
Treble: ±9 dB at 10 kHz
- Loudness: +5/+10 dB (treble/bass)
- High Filter: no
- Low Filter (Subsonic): no
- Mute:
- Direct/Line-Straight:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 88 - 108 MHz
- MW: 520 - 1,605 kHz
- Frequency response:
- Input sensitivity:
- FM: 1.1 µV
MW: 180 µV (Int.) / 10 µV (Ext.) Distortion factor:
- FM: 0.2% (Mono), 0.4% (Stereo).
Signal-to-noise ratio:
- FM: 60 dB
MW: 45 dB
- Channel separation: 40 dB
- Selectivity:
- Common wave selection:
- FM: 1.3 dB
- Spurious wave selection:
- FM: 70 dB
MW: 30 dB
- Mirror frequency attenuation:
- FM: 65 dB
- MW: 65 dB
- IF attenuation:
- FM: 90 dB
- MW: 45 dB
- AM suppression: 50 dB
- Output level:
- RDS: no
- Station memory: no
Special Features
- here, if available
Remarks
Other models of the same series:
Pictures
