ALR Jordan Number 3
Contents
Dates
General
- Manufacturer: ALR Jordan
- Model: Number 3 (Number 3, 3rd Gen).
- Years of manufacture:
- Made in: 4300 Essen 13 (ALR Akustik u. Reglungstechnik).
- Color: Black, White, Beech, Cherry, Oak
- Dimensions: approx. 230mm x 915mm x 260mm
- Weight: approx. 18 kg
- New price approx.: 2600 DM
Technical Data
- Type: 2 1/2-way bass reflex, D'Appolito, floorstanding speaker
- Driver:
- Woofer: 1x aluminum TMT(Ted Jordan)
tweeter: Vifa neodym dome tweeter power handling: 120/160 Watt (nominal/music power handling) efficiency: 89 dB
- Frequency response:
- Transmitting range: 35 - 28,000 Hz.
- Transitional ranges:
- Impedance: 4 ohms
- Recommended amplifier power: 30 - 250 Watt
Special Features
real wood veneer, 2 * bass reflex tube rear), bi-wiring
Remarks
The Number 3 is not to be confused with the Number 3 models.
The internal layout of the speaker is interesting. The frequency separation of the two bass/midrange speakers is not done via the crossover, but acoustically by the size of the resonance chamber. Small volume for the midrange of the upper speaker, considerably larger volume for the lower speaker as bass driver. This interior partitioning is done via a transversely mounted plate, so that this also effectively prevents interference.
Pictures
Reviews
The ALR number 3 has been a test winner in its class several times. The sound is quite neutral and well resolved. Low frequencies are less dominant than one might be used to from current speakers. The size of the listening room should not be too small (>20sqm), cable cross section from 3qmm, use short cables (2-3m). The number 3 is a speaker that you can listen to for hours without it getting annoying, even at higher volumes.
Links