Tascam DA-30 MK II

Daten

Tascam Stereo- DAT- Kassettendeck DA-30 MK II

Allgemein:

• Hersteller: Tascam
• Modell: DA-30 MK II
• Typ: single
• Baujahre:
• Hergestellt in:
• Farbe:
• Fernbedienung:
• Leistungsaufnahme:
• Abmessungen:
• Gewicht: 8,5 Kg
• Neupreis ca.:

Technische Daten:

• Tape Speed: 8.5 mm/sec, (12.225 mm/sec.)
• Quantization Bit: 16-bit linear (SP); 12 bit nonlinear (LP)
• Sampling Rate: Recording: 48 kHz/ 44.1 (digital, analog input); 32 kHz (digital input only)
• Frequency Response: 20- 20.000 Hz +/- 5 dB 9 SP) 20- 14.500 Hz +/- .5 dB (LP)
• Signal to Noise Ratio: Better than 92 db
• Dynamic Range: Better than 93 db
• Total Harmonic Distortion: 0.004 % at 1 kHz (SP) .07 % at 1 kHz (LP)
• Channel Separation: Better than 85 db (at 1 kHz)
• Wow and Flutter: Unmeasurable (less than 0.001 %)
• Analog Input: (XLR) balanced, +4 dBm / 10k ohm (RCA) unbalanced, -10 dB V /50k ohm
• Analog Output: (XLR) balanced, +4 dBm/10 kOhm, (RCA) unbalanced, -10 dBV (+6 dBV max)/ 430 Ohm;
• Output Level: 100 mW or more (8- Ohm load)
• Headphone Output: 1/4" phone jack (x1), 100 mW + 100 mW (8 ohm)
• Digital I/O:
• (XLR) AES/EBU (RCA) Coaxial (S/PDIF); Parallel Control I/O Port: D-sub
• 15-pin (female)
• Independent left and right channel
• AES/EBU and S/ PDIF Digital I/O
• Balanced and unbalanced I/O
• 48/ 44.1/ 32 kHz sampling frequencies
• SCMS free recording
• Built-in parallel interface