Kenwood KR 10000 MKIII
Revision as of 08:58, 19 September 2012 by Stefan Phan (talk | contribs) (Die Seite wurde neu angelegt: „==Technische Daten== *Eingänge : **Phono mag 1: 2,5 mV 50 kOhm **Phono mag 2: 2,5 mV 50 kOhm **Mikrofon: 2,5 mV 50 kOhm **Aux: 150 mV 50 kOhm **Tape Play A : 150…“)
Technical data[edit]
- Inputs :
- Phono mag 1: 2.5 mV 50 kOhm
phono mag 2: 2,5 mV 50 kOhm
- Microphone: 2,5 mV 50 kOhm
Aux: 150 mV 50 kOhm Tape Play A : 150 mV 50 kOhm
- Tape Play B : 150 mV 50 kOhm
- Outputs:
- Tape Rec Pin A : 150 mV 100 Ohm
Tape Rec Pin B : 150 mV 100 Ohm Tape Rec DIN A : 20 mV 80 kOhm Tape Rec DIN B : 120 mV 80 kOhm
- pre out: 1V 1 kOhm
output power:
- 2 x 120 W into 8 ohms (RMS).
2 x 135 W into 4 ohms (at 1000 Hz) distortion: 0,05 % *intermodulation: 0,05
- Intermodulation: 0,1 %
frequency response: 20 Hz - 40 000 Hz - 1 dB speaker outputs: 3 x 2 - A, B, C jack 8 Ohm
- Overload protection: yes
- Reception ranges: FM/VHF, AM
- Dimensions: 574 x 198 x 375 mm
- Weight: 18 Kg
Remarks[edit]
Other models of the same series:
Pictures[edit]
