Omnitronic MCP-8150
Revision as of 09:51, 20 August 2012 by Stefan Phan (talk | contribs) (Die Seite wurde neu angelegt: „==Allgemein== *Produktart : Leistungsverstärker *Rack-montierbar : Ja *Marke : Omnitronic *Funktionen :-- Brückbar, Ground-Lift *Anzahl der Kanäle :-- 8 …“)
General
- Product type : Power amplifier
- Rack mountable : Yes
- Brand : Omnitronic
- Features :-- Bridgeable, Ground-Lift
- Number of channels :-- 8
Technical data
- PA amplifier with integrated limiter for multi-zone applications
- 8 x 150 W/4 Ohm
- 8-ohm bridge operation possible
- Signal inputs via balanced XLR panel jacks or terminal blocks
- Box connection via terminal blocks
- High-pass, low-pass filter per channel switchable
- Manipulation-proof volume control on the rear panel
- 7-fold level meter with clip LED per channel
- Loudspeaker switch-on delay
- Ground lift switch against hum loops
- Fan cooled
- Rugged steel chassis with aluminum front panel
- Complete protection circuit package against short-circuit, overheating, overload and DC voltage overlay at the outputs
- Rack mountable with 3 height units
- Voltage supply:115/230 V AC, 50/60 Hz ~
- Total connected load (max.):1850 W
- Output power sinus:
- 4 Ohm:8 x 150 W
8 Ohm:8 x 100 W 8 Ohm bridged:4 x 300 W frequency range:22 - 25000 Hz Attenuation factor:> 200 Distortion factor:0,01 %
- Noise floor:90 dB
- Channel separation (at 1 kHz):51 dB
- Rise times:> 30 V/µs
- Minimum input voltage:0.77 V
- Input impedance:12 kOhm (unbalanced), 22 kOhm (balanced)
- Controls:Power switch, volume control per channel, crossover on/off per channel, high/low pass per channel, mode select switch (stereo/bridge)
- Display:Level with clip per channel, bridge
- Protection circuits:Soft start, short circuit, overheating, overload and DC voltage
- Construction:Steel chassis with aluminium front panel
- Dimensions:310 x 482 x 132 mm
- Minimum installation depth:320 mm
- Weight:20 kg
Remarks
Other models of the same series:
Pictures
