Harman/kardon HK6800

Video switching, with power supply that can be switched off. Electronic switches for: Function Tape Record Out Push-pull input circuits Subsonic Filter Phase-Correct Loudness Main Direct Bass Tone Control Treble Tone Control Tone Defeat 2 pairs of speaker connections Phono input MM/MC Output Power/THD FTC 8 Ohm120 Watt/0.08% HCC70 amps Frequency response: 0.2 Hz-180 kHz Finish: champagne and black

Output power sine (DIN) 4 Ohm per channel 130 Watt per channel Sine continuous power (FTC) 20Hz-20kHz 2-channel operation at 8 ohms: 120 watts per channel < 0.08% TH D 4 ohms: 120 watts per channel <0.08% THD Dynamic power (IHF, 1 kHz signal pulse) per channel High Voltage/High Current Mode at 8 ohms: 160 watts 4 ohms: 240 watts 2 ohms: 360 watts High Current Mode, 4 ohms: 160 2 ohms: 240 HCC (high short term current capability): ± 70 Amps Geqenkopplunq (total): 12dB Power bandwidth at half output power into 8 ohms: < 10Hz-100kHz Frequency response at 1 watt output, + 0/-3dB: 0.2Hz-180kHz Slew rate: 280V/µ sec Square wave rise time: 1.8µ sec Transient Distortion (TIM): Not measurable Attenuation factor: 70 S/N ratio at continuous power (A-wtd) Phono (MM): 80dB Phono (MC): 76dB Video/CD: 98dB Main-In: --- Input sensitivity/impedance Phono (mm): 2.5mV/47 kOhm, 125pf Phono (MC): 135 µV/56 Ohm Video/CD: 250 mv/22 Kohm Main-In: --- Mono overload level (MM/MC): 120 mV/12 mV RIAA equalisation 20Hz-20kHz: ± 0.2 dB Tone control range, bass (50Hz)/treble (10kHz): ± 10dB Subsonic filter: 15Hz, 6dB/octave

Treble filter: ---- Bass contour, boost at 50Hz: +6dB

Phase shift at bass contour (300Hz-20kHz): < 5degrees

DimensionsWidth x Height x Depth) 443 x 160 x 400mm Weight 16kg