Nubert ATM 35
Contents
Data
General
- Manufacturer: Nubert
- Model: ATM 35
- Years of manufacture:
- Made in: D
- Colour: cabinet black, front panel aluminium
- Remote control: not available
- Power supply: Plug-in power supply +/- 15V DC
- Power consumption: In operation max. 102mA / 83mA; Standby 30mA
- Power consumption: 5VA
- Dimensions: WxHxD 109 x 50 x 190mm.
- Weight: 560g / power supply 430g
- New price approx.: 265.- € (2005)
Connections
- Number of inputs: 3 high level
Cinch 3 x L/R
- Number of outputs: 1
- Cinch 1 x L/R
Technical Data
- Adjustable frequency bands: 2
- Control range: Bass / Center frequency 33Hz/ 0 to +9dB (EQ "linear"), up to +15.5dB "Max."
- Frequency range 29Hz to 20kHz linearly tiltable by ± 7dB at 20kHz
- Frequency response: 29Hz to > 110kHz (-3dB)
- Bass EQ: +9dB boost in the bass range corresponds to a linear frequency response extension of Nubert nuWave 35 speakers by approx. 12Hz. The lower cut-off frequency (-3dB) shifts from 53Hz without ATM down to 41Hz with ATM.
- Gain: 0dB
Signal-to-noise ratio: 124dB (in words: one hundred and twenty-four!), many amplifiers fail before that!
- Distortion: -102dB (0,00079%) at 1kHz, 0dBu (775mVeff)
Special Features
- automatic switch-on by audio signal, switch-on threshold 0.2mVrms at 1kHz; can be switched off
- gain internally switchable to -10dB
- delivery in attractive plastic case
- two valuable Cinch connection cables included in delivery
- an individual measurement protocol with S/N of the respective ATM module is included in delivery
Remarks
Active loudspeaker equalisation for Nubert nuWave 35 compact loudspeakers
- Extending the low frequency response of nuWave 35 speakers from 53Hz (-3dB) to 41Hz (-3dB).
- Cut below 29Hz with 4th order filter (24dB/octave)
- Stereo version, i.e. one unit is required for stereo playback.
- 5 years warranty for private users
Other models of the same series:
Pictures
| With kind permission of Nubert electronic GmbH. Use of the images by third parties, e.g. in forums or on eBay is not permitted! |