Rotel RB-951 MK II
Revision as of 13:35, 21 October 2011 by 31.16.128.180 (talk) (Die Seite wurde neu angelegt: „* Continuous Power Output Stereo Mode (20-20 kHz, < 0.03% THD) 50 watts/ch into 8 ohms * Continuous Power Output Bridged Mono Mode (20-20 kHz, < 0.1% THD) 150 wat…“)
Continuous Power Output Stereo Mode (20-20 kHz, < 0.03% THD) 50 watts/ch into 8 ohms Continuous Power Output Bridged Mono Mode (20-20 kHz, < 0.1% THD) 150 watts/ch into 8 ohms
- Total Harmonic Distortion (20Hz-20kHz, 8 ohms) < 0.03%
- Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.03%
- Frequency Response (±1 dB) : 15Hz-100kHz
- Damping Factor (20-20,000 Hz, 8 ohms) : 280
Speaker Impedance (combined load) : Stereo mode: 4 ohms minimum Bridged Mono mode: 8 ohms minimum Parallel Mono mode: 2 ohms minimum Signal to Noise Ratio (IHF A network) : 116 dB
- Input Impedance 32 k Ohms
- Input Sensitivity 1.5 volt (low setting) 0.775 volt (high setting)
- Auto Turn On Threshold Level (if activated) 10 mV input signal
- Auto Turn Off Delay Time (if activated) 5 minutes with no signal
- Power Requirements USA: 115 Volts, 60 Hz Europe: 230 Volts, 50 Hz
- Power Consumption 200 Watts
- Dimensions (W x H x D) 440 x 92 x 334 mm 173/8 x 35/8 x 131/4 in
- Weight (net) 6.8 kg, 15 lb.