NAD 705

PRE-AMP SECTION Phono input Input impedance (R and C) 47kΩ / 250pF Input sensitivity, 1kHz MM 2.5mV ref. 0.5V Signal/Noise ratio (A-weighted with cartridge connected) MM 76dB ref. 5mV THD (20Hz - 20kHz) <0.04% RIAA response accuracy (20Hz - 20kHz) ±0.5dB Line level inputs Input impedance (R and C) 50kΩ / 200pF Input sensitivity (ref. 1W) 180mV Maximum input signal >8V Signal/Noise ratio (A-weighted ref 1W) 90dB Frequency response (20Hz - 20kHz) +0.5dB, -1dB Line level outputs Output impedance Pre-amp 220Ω Tape Source Z + 2kΩ Maximum output level Pre-amp >8V Tape >10V Tone controls Treble ±7dB at 10kHz Bass ±10dB at 50Hz POWER AMP SECTION Continuous output power into 8Ω * 40W (16dBW) Rated distortion (THD 20Hz - 20kHz) 0.03% Clipping power (maximum continuous power per channel) 50W IHF Dynamic headroom at 8Ω +3.5dB IHF dynamic power (maximum short term power per channel) 8Ω 90W (19.5dBW) 4Ω 130W (21dBW) 2Ω 160W (22dBW) Damping factor (ref. 8Ω, 50Hz) >60 Input impedance 20kΩ / 560pF Input sensitivity (for rated power into 8Ω) 1V Frequency response (20Hz - 20kHz) ±0.3dB Signal/noise ratio ref. 1W 100dB ref. rated power 116dB THD (20Hz - 20kHz) <0.03% FM TUNER SECTION Input sensitivity Mono -30dB THD+N 10dBf (0.9µV/75 Mono 50dB S/N 14dBf (1.4µV/75 Stereo 50dB S/N 35dBf (15µV/75 Stereo 60dB S/N 45dBf (50µV/75 Capture ratio (45 - 65dBf) <1.6dB AM rejection (45 - 65dBf) >60dB Selectivity 60dB Image rejection >80dB I F rejection >60dB Harmonic distortion Mono 0.15% Stereo 0.2% Signal/Noise ratio Mono >82dB Stereo >76dB Frequency response ±0.5dB 30Hz - 15kHz Channel separation at 1kHz >35dB AM TUNER SECTION Usable sensitivity 5µV Selectivity 30dB Image rejection 45dB I F rejection 35dB Signal/Noise ratio 45dB Harmonic distortion 0.5% Remote Yes NAD Link Yes PHYSICAL SPECIFICATIONS Dimensions (W x H x D) 420 x 105 x 318 Net weight 6.6kg Shipping weight 7.6kg

• Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distiortion.

Dimensions are of unit’s cabinet without attached feet; add up to 18mm for total height. Dimension depth excludes terminals, sockets, controls and buttons.