T+A Pulsar CD 1220 R

Template:Needs work Specifications

Drive: narrow-tolerance linear drive, LDGU optics, 780nm/2mW semiconductor laser. Synchronization: crystal controlled, fluctuations not measurable

D/A converter and output stage

Digital filter: freely programmable signal processor with four different filter types, 8-fold oversampling, 56 bit resolution, FIR, IIR, Bezier, Bezier/IIR filters

D/A converter: double differential mode, two 1-bit sigma-delta converters with 256 times total oversampling and two multibit DAC-20 bit colinear converters in 2-way circuitry

Noise shaping: 4th order,(ZSNS)

Analog filter: phase linear Bessel filter, (constant group delay) 3rd order, 60 kHz

Frequency response (+0, -0.2 dB): 2 Hz....20 kHz distortion factor/intermodulation: <0.001 effective system dynamic range: 97 dB signal-to-noise ratio: 112 dB extraneous voltage spacing: 111 dB Channel separation 1 kHz/10 kHz: 111 dB/110 dB

Outputs

Digital output optical: SP-DIF, TOS-Link, 660 nm, -18 dBm (up to 10 m cable length connectable)

Digital output coaxial: SP-DIF, 0.5 V/75 ohm (replaceable by AT&T fiber optic output)

Analogue output cinch: Output voltage 2Veff Output impedance 22 ohm

Mains connection: 230 V/50 Hz, 16 VA

source: manual