Denon PMA-300 V

De Denon pMA-300V was de meest verkochte versterker bij Willofoon HiFi in 1988 Goede versterker die allerlei speakers kon aansturen. Geen museum exemplaar

Gegevens; Type Pre- main amplifier < Power amplifier section > Rated output (20Hz - 20kHz) 60W + 60W (8 Ω) 80W + 80W (6 Ω) Utility installed capacity 70W + 70W (8 Ω, EIAJ) Input sensitivity/impedance CD input: 150mV (Peak.10V) /30k Ω Total height harmonic wave distortion factor 0.008% (20Hz - 20kHz and 30W, 8 Ω) Cross modulation distortion factor 0.005% (60W suitable, 8 Ω) Dynamic power 120W/2 Ω Output bandwidth 5Hz - 40kHz (output 30W, 0.07% and 8 Ω) Frequency characteristic 4Hz - 100kHz, +0 -3dB (1W, 8 Ω) Output impedance 0.1 Ω Or less Output terminal Speaker: AorB: 6 - 16 Ω, A+B: 12 - 16 Ω Headphone jack installed capacity: 230mW (8 Ω), 8 - 400 Ω conformity < Pre-amp section > Input sensitivity/impedance Phono MM: 2.5mV/47k Ω Phono MC: 0.25mV/100 Ω CD, DAT, Tuner, AUX/Video and Tape1, 2 (PB): 150mV/30k Ω Installed capacity/rated output 10V/150mV Total height harmonic wave distortion factor (Rec Out) 0.004% (1kHz and 8V) RIAA deviation 20Hz - 20kHz (MM IN - Rec Out) < Synthesis > Signal-noise ratio (input short circuit and auditory sensation weighting A) Phono MM: 80dB (at the time of 2.5mV input) Phono MC: 62dB (at the time of 0.25mV input) Line: 98dB (at the time of 150mV input) Tone control quality Bass: ±8dB (100Hz) Treble: ±8dB (10kHz) Sub sonic filter 16Hz, -12dB/oct Loudness control quality 100Hz: +7dB 10kHz: +6dB Electric power consumption 107W Power source AC220V and 50Hz External size (the foot, the knob and the terminal etc. are included) Width 434× height 112× depth 281mm Weight 5.8kg