Tascam DA-30 MK II

• Tape Speed: 8.5 mm/sec, (12.225 mm/sec.)
• Quantization Bit: 16-bit linear (SP); 12 bit nonlinear (LP)
• Sampling Rate: Recording: 48 kHz/44.1 (digital, analog input); 32 kHz (digital input only)
• Frequency Response: 20 Hz - 20 kHz +/- .5dB 9SP) 20 HZ - 14.5 kHz +/- .5dB (LP)
• Signal to Noise Ratio: Better than 92 db
• Dynamic Range: Better than 93 db
• Total Harmonic Distortion: 0.004% at 1 kHz (SP) .07% at 1 kHz (LP)
• Channel Separation: Better than 85 db (at 1 kHz)
• Wow and Flutter: Unmeasurable (less than 0.001%)
• Analog Input: (XLR) balanced, +4 dBm / 10k ohm (RCA) unbalanced, -10 dB V /50k ohm
• Analog Output: (XLR) balanced, +4 dBm/10k ohm, (RCA) unbalanced, -10 dBV (+6 dBV max)/ 430 ohm;
• Output Level: 100mW or more (8-ohm load)
• Headphone Output: 1/4" phone jack (x1), 100 mW + 100 mW (8 ohm)
• Digital I/O:
• (XLR) AES/EBU (RCA) Coaxial (S/PDIF); Parallel Control I/O Port: D-sub
• 15-pin (female)
• Independent left and right channel
• AES/EBU and S/PDIF Digital I/O
• Balanced and unbalanced I/O
• 48/44.1/32 kHz sampling frequencies
• SCMS free recording
• Built-in parallel interface
• 8,5 kg