Kenwood KR-A 5050
Data[edit]
General
- Manufacturer: Kenwood
- Model: KR-A 5050
- Type: Receiver
- Years of manufacture: 1993 - 1994
- Made in: Korea
- Color: Black
- Remote control: yes (RC-0500)
- Power consumption: 180 W
- Dimensions (WxHxD): 440 x 133 x 350 mm
- Weight: 10.2 kg
- Original price approx.: 599 DM
Connections
- Number of inputs:
- 1x Phono MM (Cinch)
1x CD/AUX In (Cinch) 2x Tape In (Cinch) 2x Video In (Cinch)
- FM antenna
- AM antenna
- Number of outputs:
- 2x Tape Out (Cinch)
- Headphones (6,3mm jack)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (at distortion)
- 8 Ohm: 2x 105 W (IHF'66)
- 4 Ohm:
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.03% (1 kHz with 50 W at 8 ohms).
- Attenuation factor:
- Frequency response (IHF'66): 20 to 20,000 Hz.
- Signal-to-noise ratio (IHF'66):
- Phono MM: 73 dB
Line: 100 dB
- Stereo channel separation:
- Tone control:
- Bass: yes (±10 dB at 100 Hz)
Treble: yes (±10 dB at 10 kHz)
- Loudness: yes (at -30dB volume approx. +8 dB at 100 Hz)
- High Filter:
- Low Filter (Subsonic):
- Mute: yes
- Direct/Line-Straight:
Tuner
- Reception: FM, AM
- Frequencies:
- FM: 87.5 - 108 MHz
- AM (at 9kHz steps): 531 - 1602 kHz
- AM (at 10kHz steps): 530 - 1610 kHz
- Frequency response: 30 - 15,000 Hz
- Input sensitivity:
- FM: 1.3 µF
AM: 40 µF Distortion factor: FM: 0.4% (mono), 0.5% (stereo) (each at 65 dBf input signal) Distortion factor: AM: 0.5% (mono), 0.4% (stereo)
- Signal-to-noise ratio:
- FM: 78 dB (mono), 73 dB (stereo) (each at 65 dBf input signal).
- AM: 50 db (30% mod. 1 mV input signal).
- Channel separation:
- Selectivity:
- Co-wave selection:
- Spurious wave selection:
- IF attenuation:
- IF attenuation:
- Output level:
- RDS: yes
- Station memory: yes/20
Special Features
- RDS
Remarks[edit]
- Other models in the same series:
- Kenwood KR-A 3050
- Kenwood KR-A 4050
- Kenwood KR-A 5050
Pictures[edit]
- Image: Kenwood KR-A 5050
Reports[edit]
Links[edit]
- Prospectus in the Kenwood archive: [[1]