Kenwood KR-A 5010

Revision as of 11:38, 9 February 2021 by Ponsel (talk | contribs) (Bemerkungen)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Data

General

  • Manufacturer: Kenwood
  • Model: KR-A 5010
  • Type: Receiver
  • Years of manufacture: 1989 - 1990
  • Made in: Korea
  • Color: Black
  • Remote control: yes (RC-6010)
  • Power consumption: 150 watts
  • Dimensions: 440 (W) x 138 (H) x 284 (D) mm
  • Weight: 6.0 kg
  • Original price approx.: 698 DM


Connections

  • Number of inputs:
    • CD (Cinch) (150mV/47kOhm) (10Hz - 70kHz +0dB/-3dB).
    • Tape-1 (Cinch) (150mV/47kOhm) (10Hz - 70kHz +0dB/-3dB)

Tape-2 (Cinch) (150mV/47kOhm) (10Hz - 70kHz +0dB/-3dB)

    • Video-1 (Cinch) (150mV/47kOhm) (10Hz - 70kHz +0dB/-3dB)

Video-2 (Cinch) (150mV/47kOhm) (10Hz - 70kHz +0dB/-3dB)

    • Phono (MM) (Cinch) (2,5mV/ 47kOhm)
    • FM antenna (75/300 Ohm)
    • AM aerial (terminals)
    • 2 x system control (jack)
  • Number of outputs:
    • Tape-1 Rec (Cinch)
    • Tape-2 Rec (Cinch)
    • 2 x 2 loudspeakers (terminals)
    • Headphones (6.3 mm jack)


Technical Data

Amplifier

  • Continuous power (at distortion factor)
    • 8 Ohm: 2 x 60 W (IEC) ( <0,7 % distortion factor)
    • 4 Ohm: 2 x 60 W (DIN 1 kHz)
  • Dynamic power
    • 8 Ohm:
    • 4 Ohm:
  • Total harmonic distortion: 0.1 % (1 kHz 8 ohms).
  • Attenuation factor:
  • Frequency Response:
  • Signal-to-noise ratio:
  • Stereo Channel Separation:
  • Tone control: Graphic Equalizer
    • Center frequencies: 60 Hz, 300 Hz, 1 kHz, 3 kHz, 10 kHz
    • Control range +/- 12 dB
    • Bass:
    • Treble:
  • Loudness:
  • High Filter:
  • Low Filter (Subsonic):
  • Mute: yes
  • Direct/Line-Straight:


Tuner

  • Reception: FM AM
  • Frequencies:
    • FM: 87.5 MHz - 108 MHz

AM: 530 kHz - 1610 kHz (10 kHz channel spacing) , 530 kHz - 1602 kHz (9 kHz channel spacing)

  • Frequency response: 30 Hz - 15 kHz (+1.0 dB / -2.5 dB)
  • Antenna impedance:
    • FM: 75 ohms unbalanced
  • Input sensitivity:
    • FM:
    • AM: 10 µV

Distortion factor: (1kHz)

    • FM: Mono 0,2 % , Stereo 0,3 %

AM: 0.45 Signal-to-noise ratio: at 65 dBf (IHF) FM: Mono: 78 dB , Stereo: 72 dB

    • AM: 50 dB
  • Channel separation:
  • Selectivity:
    • FM:
      • IHF: 11.8 dBf (2.0 µV at 300 ohms).
      • DIN: Mono: 0.9 µV , Stereo: 25 µV
    • AM: 25 dB
  • Common wave selection:
  • Spurious wave selection:
  • IF attenuation:
  • IF attenuation:
  • AM suppression:
  • Output level:
  • RDS: no
  • Station memory: 20


Comments

Other models of the same series:

Receiver:

A/V Receiver':

CD Player':

Tape Decks':

Pictures

  • Extract from Kenwood catalogue Hifi '89/'90

Kenwood KR-V5010 (Hifi 89-90).jpg

Reports

Links