Scan-Dyna 4000
Data
General
- Manufacturer: Scan-Dyna
- Model: 4000
- Type: Receiver
- Years of manufacture: 1971 - 1974
- Made in: Denmark
- Colors: Silver / Black, Wooden Cabinet Walnut, White
- Dimensions: 548 x 132 x 250 mm (WxHxD)
- Weight: 10.075 kg
- Original price approx.: 1'495 DM
Connections:
- Number of inputs:
- Phono MM: 2 mV / 47 kOhm
Tape Play 1, 2: 200 mV / 470 kOhm
- AUX 1, 2: 200 mV / 470 kOhm
- Number of outputs:
- Tape Rec 1, 2: 100 mV / 100 kOhm
- Headphones (6.3 mm jack): 4 Ohm
- 2 pairs of speakers
Technical data:
Amplifier:
- Continuous power (at distortion)
- 8 Ohm: 2x 40 W
4 Ohm: 2x 60 W
- dynamic power
- 8 Ohm: 2x 55 W
- 4 Ohm: 2x 85 W
- Total harmonic distortion: 1.3
- Attenuation factor: 20 at 1 kHz
- Frequency response: 10 - 40'000 Hz (± 1,5 dB)
- Signal-to-noise ratio:
- Phono: > 56 dB
High level: > 65 dB
- Stereo channel separation: 60 dB
- Tone control:
- Bass: ± 20 dB at 40 Hz
Treble: ± 20 dB at 12.5 kHz
- Loudness: + 10 dB 50 Hz, + 7.5 dB at 10 kHz
- High Filter: - 18 dB / octave at 4 kHz
- Low Filter (Subsonic): - 12 dB / octave at 40 Hz
Tuner
- Reception: FM/MW/LW
- Frequencies:
- FM: 88 - 108 MHz
MW: 535 - 1605 KHz LW: 145 - 360 KHz
- Input sensitivity:
- FM: 1.6µV
- MW: 18µV
- Frequency response: 50 - 15'000 Hz, ± 1,5 dB
- Distortion factor: 0.4 % (mono, stereo)
- Signal to noise ratio: 60 dB
- Channel separation: 40 dB at 1 kHz
- Selectivity: 60 dB at 400 kHz
- Co-wave selection: 1.5 dB
- Spurious wave selection: 90 dB
- Image frequency attenuation: 90 dB
- IF attenuation: 100 dB
- AM suppression: 50 dB
Comments
- Other models in the same series:
- Receiver:
- Scan-Dyna 2000
- Scan-Dyna 2400
- Scan-Dyna 3000
- Scan-Dyna 4000
- Speakers:
- Scan-Dyna A-10
- Scan-Dyna A-20
- Scan-Dyna A-25
- Scan-Dyna A-25 II
- Scan-Dyna A-30
- Scan-Dyna A-30 II
- [[Headphones:
- Scan-Dyna K-72x
Pictures
- Picture: Scan-Dyna 4000
- Picture: Scan-Dyna 4000
- Extract from brochure: Scan-Dyna 4000
