Sansui QRX-6500
Data
General
- Manufacturer: Sansui
- Model: QRX-6500
- Type: Quadraphonic Receiver
- Years of manufacture: 1972 - 1974
- Made in: Japan
- Color: brushed aluminum front, wooden cabinet
- Remote control: no
- Power consumption: 470 W max.
- Dimensions: 536 x 181 x 363 mm (WxHxD)
- Weight: 22 kg
- Original price approx.: 3'650 DM
Connections
- Number of inputs:
- Phono 1, 2: 2.5 mV, 50 kOhm, max. 330 mV
- Aux 2-channel: 150 mV, 50 kOhm
- Aux 4-channel: 150 mV, 50 kOhm
- Tape Play 1, 2, 2-channel: 150 mV, 50 kOhm
- Tape Play DIN, 2-channel: 150 mV, 50 kOhm
- Tape Play 1, 2, 4-channel: 150 mV, 50 kOhm
- Tape Play DIN, 4-channel: 150 mV, 50 kOhm
- Discrete 4-channel: 150 mV, 50 kOhm
- Main In:
- Antenna (FM: 75, 300 Ohm, AM)
- Microphone (6.3mm jack).
- Number of outputs:
- Tape Rec 1, 2: 100 mV
Tape Rec DIN: 30 mV
- Dolby NR Adapter:
- Pre Out: 1 V
- Headphones (6,3mm jack): 1x front, 1x rear
- 3 speaker pairs front
- 2 speaker pairs in the back
Technical Data
Amplifier
- Continuous power (at distortion):
- 8 Ohm: 4x 33 W (RMS, 20 Hz - 20 kHz, 0.5 %), 4x 37 W (1 kHz).
- 4 Ohm: 4x 60 W
- Dynamic power:
- 8 Ohm: 190 W
- 4 Ohm: 280 W
- Total harmonic distortion: < 0.05 %
- Attenuation factor: 10 at 8 Ohm
- Frequency response:
- Phono: 30 Hz - 15 kHz, ± 1 dB
- High level: 20 Hz - 30 kHz, ± 1 dB
- Signal-to-noise ratio:
- Phono: 60 dB
High level: 70 dB
- Tone control:
- Bass: ± 15 dB at 50 Hz
Treble: ± 15 dB at 20 kHz
- Loudness: + 8 dB at 50 Hz, + 3 dB at 10 kHz
- Treble filter: - 10 dB at 10 kHz, 6 dB / octave
- Subsonic: - 10 dB at 50 Hz, 6 dB / octave
- Mute: yes, - 20 db
- Direct/Line-Straight: yes (Tone off)
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 88 - 108 MHz
- MW: 530 - 1,605 kHz
- Input sensitivity:
- FM: 1.8µV
- MW: 15µV
- Frequency response: 30 - 15,000 Hz (+0.3 dB, -1 dB)
- Distortion factor:
- FM, 1 kHz: < 0.5% (mono), < 0.8% (stereo).
- Signal-to-noise ratio:
- FM: 70 dB (mono), 65 dB (stereo)
MW: 55 dB
- Channel separation: 35 dB (1kHz)
- selectivity: 70 dB
- Co-wave selection: 1.5 dB
- Spurious wave selection:
- FM: 80 dB
MW: 35 dB
- Image frequency attenuation:
- FM: 100 dB
- MW: 65 dB
- IF attenuation:
- FM: 100 dB
- MW: 85 dB
- AM suppression: 55 dB
Special Features
- Switch for 4-channel RM, SQ, Discrete / Stereo / Mono
- CD-4 connectable
- Bass and treble control separately for front / rear
Remarks
- Other models in the same series:
- Sansui QRX-2000
- Sansui QRX-3000
- Sansui QRX-3500
- Sansui QRX-5001/501
- Sansui QRX-5500
- Sansui QRX-6001/601
- Sansui QRX-6500
- Sansui QRX-7001/701
- Sansui QRX-7500
- Sansui QRX-8001/801
- Sansui QRX-9001/901
Pictures
- Extract from brochure: Sansui QRX-6500
Reports
- Review from Good Old Hifi: [1]
- Report at "Hifi Museum" [=quadro]