Audio Technica AT 95 E
Revision as of 11:52, 9 February 2020 by Analoghatwas (talk | contribs) (→Bemerkungen: Stückzahl, ref. https://www.lowbeats.de/test-audio-technica-vm95-6-mm-abtaster-bis-200-euro/)
Data[edit]
General
- Manufacturer: Audio Technica
- Model: AT 95 E
- Years of manufacture: 1981 - 2019
- Made in: Japan
- Color: green needle carrier
- Weight: 5,7 g
- Original price approx.: 40,00 €
Technical data
- Principle: Moving Magnet (MM)
- Output voltage: 3.5 mV / 1 kHz
- Channel balance: 2.5 dB / 1 kHz
- Crosstalk attenuation: 20 dB / 1 kHz
- Frequency response: 20 - 20,000 Hz
- Channel separation: 18 dB / 1 kHz
- Output voltage: 4.0 mV / 1 kHz
- Terminating resistor: 47 kOhm
- Impedance: 2,800 Ω / 1 kHz
- Inductance: 400 mH / 1 kHz
- Needle type: Elliptical
- Tracking force: 15 - 25 mN (1.5 - 2.5 g).
- Recommended tracking force: 20 mN (2.0 g).
- Needle compliance (static): 20 × 10-6 cm/dyn
- Needle compliance (dynamic): 6.5 × 10-6 cm/dyn / 100 Hz
- Degree of fillet of the diamond:
- Diamond tip mass:
- Vertical scanning angle: 20°.
- Forward resistance:
- Recommended terminating resistor: 47 kΩ.
- Recommended load capacitance per channel: 100-200 pF
Links[edit]
- Audio-Creativ: Audio Technica pickups 2015, retrieved 22 October 2019
Comments[edit]
Other models in the same series:
Over 5 million units of the AT 95E were produced.
Images[edit]
