Audio Technica AT 95 E

Data

General

• Manufacturer: Audio Technica
• Model: AT 95 E
• Years of manufacture: 1981 - 2019
• Made in: Japan
• Color: green needle carrier
• Weight: 5,7 g
• Original price approx.: 40,00 €

Technical data

• Principle: Moving Magnet (MM)
• Output voltage: 3.5 mV / 1 kHz
• Channel balance: 2.5 dB / 1 kHz
• Crosstalk attenuation: 20 dB / 1 kHz
• Frequency response: 20 - 20,000 Hz
• Channel separation: 18 dB / 1 kHz
• Output voltage: 4.0 mV / 1 kHz
• Terminating resistor: 47 kOhm
• Impedance: 2,800 Ω / 1 kHz
• Inductance: 400 mH / 1 kHz
• Needle type: Elliptical
• Tracking force: 15 - 25 mN (1.5 - 2.5 g).
• Recommended tracking force: 20 mN (2.0 g).
• Needle compliance (static): 20 × 10-6 cm/dyn
• Needle compliance (dynamic): 6.5 × 10-6 cm/dyn / 100 Hz
• Degree of fillet of the diamond:
• Diamond tip mass:
• Vertical scanning angle: 20°.
• Forward resistance:
• Recommended terminating resistor: 47 kΩ.
• Recommended load capacitance per channel: 100-200 pF

Links

• Audio-Creativ: Audio Technica pickups 2015, retrieved 22 October 2019

Comments

Other models in the same series:

• AT 90
• AT 91
• AT 93
• AT 94E
• Successor: VM95 E (as of 2019)

Over 5 million units of the AT 95E were produced.

Images