Technics SH-P1

Revision as of 00:42, 9 February 2020 by Hapeg2 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Data[edit]

General

  • Manufacturer: Technics
  • Model: SH-P 1
  • Type: PCM recording processor for PCM recording and playback in combination with a video recorder.
  • Note: The SH-P 1 was introduced at the Tokyo Audio Fair in 1979 with a retail price. Was only built to order by hand. It is not known if customer units were ever manufactured.
  • Year of manufacture: 1979
  • Manufactured in: Japan
  • Color: Black
  • Power consumption: 100 W
  • Dimensions: 450 x 205 x 480 mm (WxHxD)
  • Weight: approx. 22 kg
  • New price approx.: 800'000 Yen (Japan, 1979), corresponds to about 12'000 DM


Connections

  • Number of inputs:
    • Input sensitivity Line: 142 mV, 50 kOhm.
    • Microphone: 66 dB, 600 Ohm
    • Video input: 1 V p-p, 75 Ohm
  • Number of outputs:
    • Line: 250 mV, 560 ohms
    • Output level: 1 V, 75 Ohm


Technical Data

  • Frequency response: 2Hz - 20kHz, +0.5 -1.0dB
  • Distortion factor: 0.03
  • Signal to noise ratio: 85 dB


Special Features

  • The PCM SH-P1 is a digital audio processor that can convert analog audio signals into digital bit sequences, which can then be recorded onto a standard video cassette using a VCR.
  • Since the sound of non-HIFI recorders was relatively poor compared to other video formats due to the slow tape running speed, completely new sound worlds in digital stereo sound now became possible.
  • Whereas up to now the sound quality could get worse or better depending on the quality of the tape, it remains the same when using the PCM SH-P1.
  • Furthermore, any number of copies of a tape can be made without any loss of sound quality.
  • The PCM SH-P1 has the same design as the Technics pre- and power amplifiers SU-A2 and SE-A1. It is stackable with these components.
  • Any PCM-capable video recorder can be used as a recording device.
  • Remarkably, the actually poor longitudinal sound of a video cassette is maintained consistently brilliant when using the PCM SH-P1.
  • Every video recorder thus becomes a DAT recorder.
  • The only disadvantage to contemporary digital audio processors are the missing digital inputs and outputs.
  • The resolution of the coding is alternatively with 14 or 16 bit possible.
  • The sound is recorded on the video track. Therefore the PCM SH-P1 does not serve as a supplement for the sound, but turns every video recorder into a DAT recorder for high quality audio recordings.


Comments[edit]


Pictures[edit]

  • Image: Technics SH-P 1 front

Technics SH-P1-1.jpg


  • Picture: Technics combination SE-A 1, SU-A2, SH-P1

Technics SH-P1-4.jpg


Reports[edit]

Links[edit]

  • External link on website "Audio Heritage, Japan": [[1]]